Trunnion (Yoke) Mounting - Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual

5-8
(51 mm)
7.5 in (190 mm)

Trunnion (yoke) Mounting

The display unit can be conveniently mounted on a dash area, chart table,
bulkhead or deckhead.
Note: The gasket should be fitted to the rear of the unit to ensure EMC
compliance.
➤
To trunnion mount the display unit, proceed as follows:
1. Loosen the trunnion knobs and remove the trunnion from the display
2. Mark the locations of the trunnion screw holes on the mounting sur-
3. Use the screws supplied to fix the trunnion at the marked locations.
9.13 in (232 mm)
7.67 in (195 mm)
2 in 2 in
(51 mm)
Figure 5-4: Raynav 300 GPS Plotter Dimensions
unit.
face.
Raynav 300 GPS Plotter
3.07 in (78 mm)
1.2 in
(31 mm)
3.15 in (80 mm)
plug clearance
6.9 in (175 mm)
4962-2