Control Unit Nmea Inputs; Seatalk/Nmea Interface; Connecting Several Items Of Nmea Equipment - Raymarine 150/400 Installation Manual

38
Connect:
•
•

Control unit NMEA inputs

You can connect the outputs from a single item of NMEA equipment
to the NMEA inputs on the ST6001+ or ST7001+ control units.
Í

SeaTalk/NMEA interface

The SeaTalk/NMEA interface (part number: E85001) enables you to
connect NMEA equipment to the SeaTalk system. It allows the
non-SeaTalk equipment to transmit and receive information to/from
the SeaTalk system.
The interface converts:
•
•
Í
Connect:
•
•

Connecting several items of NMEA equipment

If you need to connect several NMEA items to the course computer,
you will need to use an appropriate combination of:
•
•
•
Type 150/400 Autopilot System: Installation Guide
the NMEA outputs from the equipment (such as navigators, wind
or speed instruments to the NMEA inputs on the course computer
the NMEA outputs on the course computer to the NMEA inputs
on the equipment (such as radar)
For more information, refer to the control unit owner's handbook.
NMEA data from the equipment into SeaTalk data
SeaTalk data from the SeaTalk system into NMEA data
For more information about NMEA and SeaTalk received and transmitted,
refer to the handbook supplied with the interface.
the NMEA equipment to the SeaTalk/NMEA interface
the SeaTalk/NMEA interface to:
• one of the course computer SeaTalk terminals
• or, any other SeaTalk product (using one of the available
interface cables)
course computer NMEA inputs and outputs
control unit NMEA inputs
SeaTalk/NMEA interface (part number: E85001)