Quadra-Fire MTVERNON-AE-MBK Owner's Manual & Installation page 33

R
f. Removing the Combustion (Exhaust) Blower
1. The combustion blower is mounted in the bottom
right rear of the appliance. Figure 33.1.
2. Use an 11/32 nut driver to loosen all six nuts, but do
not remove. Rotate the blower and remove from the
housing. Figure 33.2.
3. Set the blower on the top of the housing. You do not
need to disconnect the wires. Figure 33.3.
4. Vacuum out the exhaust area. Figure 33.4.
Figure 33.1
Loosen all n ts
Figure 33.2
September 1, 2008
Combustion Blower
t do Remove
Mt. Vernon Pellet Stove (AE)
Set lo er on top of ho sing
o not dis onne t the ires
Figure 33.3
Va
Figure 33.4
7034-106E
m o t the e ha st area
Page 33