Quadra-Fire MTVERNON-AE-MBK Owner's Manual & Installation page 2

Mt. Vernon Pellet Stove (AE)
Hearth & Home Technologies welcomes you to our tradi-
tion of excellence! In choosing a Quadra-Fire appliance,
you have our assurance of commitment to quality, durabil-
ity, and performance.
This commitment begins with our research of the market,
including 'Voice of the Customer' contacts, ensuring we
make products that will satisfy your needs. Our Research
and Development facility then employs the world's most
advanced technology to achieve the optimum operation of
LOCATION OF SAMPLE SERIAL NUMBER / SAFETY LABEL: Back of Stove
CAUTION
OPERATION DO NOT TOUCH,
KEEP CHILDREN, CLOTHING
AND FURNITURE AWAY.
ATTENTION:
CHAUD LORS DE L'OPÉRATION. NE PAS
TOUCHER. GARDEZ LES ENFANTS ET LES VÊTEMENTS
LOIN DE L'ESPACE DÉSIGNÉ DE L'INSTALLATION. LE
CONTACT PEUT CAUSER DES BRÛLURES À LA PEAU. VOIR
ESPACES LIBRES MINIMUM DES MATÉRIAUX COMBUSTIBLES:
A 2 in (51mm)
B 6 in. (152mm)
A
C 2 in. (51mm)
D 3 in. (76mm)
INSTALLATION DE L'ALCÔVE
B
Une hauteur minimum de l'alcôve:
Une hauteur minimum mur de côté de l'alcôve:
Une épaisseur minimum mur de côté de l'alcôve:
C
La profondeur maximum de l'alcôve:
Note 1: Dans les installations résidentielles, lorsque les pièces
TPVNT-MV, (dessus de l'adapteur de ventilation 3 in. - 3 in.) et
812-3570 (le ressaut de l'adapteur 3 in. - 6 in.), un tuyau connecteur
C
de 6 in. pour mur simple de calibre 24 peut être utilisé.
Note 2: Pour l'installation dans les maisons préfabriquées, lorsque
les pièces TPVNT-MV, (dessus de l'adapteur de ventilation 3 in. - 3
D
in.) et 812-3570 (le ressaut de l'adapteur 3 in. - 6 in.), utilisez un
F
tuyau connecteur enregistré pour mur double. Un assemblage d'air
extérieur (pièce 811-0872), doit être utilisé pour l'installation dans
les maisons préfabriquées.
E
PROTECTION DU SOL
G
G
I* = 2 in. (51mm)
J = 2 in. (51mm)
K = 6 in. (152mm)
Page 2
:
HOT WHILE IN
E 6 in. (152mm)
F 8 in. (203mm)
G 3 in. (76mm)
43 in.(1092mm)
6 in. (152mm)
40 in. (1016mm)
36 in. (914mm)
I*
J J
K
7034-106E
our stoves, inserts and fireplaces. And yet we are old-fash-
ioned when it comes to craftsmanship. Each unit is meticu-
lously fabricated and surfaces are hand-finished for lasting
beauty and enjoyment. Our pledge to quality is completed
as each model undergoes a quality control inspection.
We wish you and your family many years of enjoyment in
the warmth and comfort of your hearth appliance. Thank
you for choosing Quadra-Fire.
Serial No. Model Name
MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS
Listed Solid Fuel Room Heater/Pellet ALCOVE INSTALLATION:
Type Stove. Also suitable for Mobile
Min. Alcove Height:
Home Installation. This appliance has
43 in. (1092mm)
been tested and listed for use in
Min. Alcove Side Wall:
Manufactured Homes in accordance with
6 in. (152mm)
OAR 814-23-9000 through 814-23-909.
Min. Alcove Width:
40 in. (1016mm)
Tested to: ASTM E1509-04, ULC S627-00,
Max. Alcove Depth:
ULC/ORD-C1482-M1990 Room Heating
36 in. (914mm)
Pellet Burning Type, (UM) 84-HUD FOR USE
ONLY WITH PELLETIZED WOOD. See Owner's
A 2 in (51mm)
Manual for other fuel options.
B 6 in. (152mm)
Input Rating: 60,000 Btu's/hr. Electrical
C 2 in. (51mm)
Rating: 115 VAC, 60 Hz, Start 5 Amps, Run
D 3 In (76mm)
1.25 AMPS.
E 6 in (152mm)
Route power cord away from unit. Do not F 8 in.(203mm)
route cord under or in front of appliance. G 3 in. (76mm)
DANGER: Risk of electrical shock.
Disconnect power supply before servicing.
Note 1: In residential
Replace glass only with 5mm ceramic
installations, when using
available from your dealer. To start, set
Parts TPVNT-MV, (3 in. - 3
thermostat above room temperature, the
in. Top Vent Adapter) and
stove will light automatically. To shutdown,
812-3570 (3 in. - 6 in. Offset
Adapter), 24 gauge 6 in.
set thermostat to below room temperature.
single wall flue connector
For further instruction refer to owner's
may be used.
manual.Keep viewing and ash removal
doors tightly closed during operation.
Note 2: In manufactured home
installation, when using Part
TPVNT-MV, (3 in. - 3 in. Top Vent
Adapter) and 812-3570 (3 in. - 6 in.
Offset Adapter), use listed double
wall flue connector. An Outside Air
Kit (Part 811-0872), must be used
with manufactured home installation.
Manufactured by / Fabriqué par:
FLOOR PROTECTION
I* = 2 in. (51mm)
J = 2 in. (51mm)
K = 6 in. (152mm)
1445 Highway North,
Colville, WA 99114
Use a non-combustible floor protector, extending
www.quadrafire.com
beneath heater and to the front/sides/rear as indicated.
Made in the USA Measure front distance (K) from the surface of the
glass door.
Fait-Aux États-Unix
*Non-combustible floor protection must extend beneath the
flue pipe when installed with horizontal venting or under the
DO NOT REMOVE THIS LABEL
Top Vent Adapter with vertical installation. RECOMMENDED
NE PAS ENLEVER L'ÉQUETTE
IN USA
Mfg Date
Mt. Vernon Pellet
A
Stove AE
B
SERIAL NO. / NUMÉRO DU
007001
C
C
D
F
E
G
G
I*
J
J
K
Beaverton
Tested &
O-T L
Oregon USA
Listed by
C
US
OMNI-Test Laboratories, Inc.
Report / Rapport
061-S-68-6
7034-107B
Test Lab & Report No.
September 1, 2008
R