Apply Weight Decals And Lubricant - Precor move beyond S3.15 Assembly And Maintenance Manual

S3.15 Assembly and Maintenance Guide
12. Apply Weight Decals and
Lubricant
A. Peel the Weight Label off the Weight Label Strip.
B. Peel the backing off the Weight Label to expose
the adhesive and place a label on each Weight
Plate, starting with the Top Cap Weight. The
recommended location of the label is toward the
rear of the unit (refer to the illustration).
C. Apply one tube of lubricant to each Guide Rod.
CAUTION: The lubricant can stain clothes. Wear
proper attire when lubricating the Guide Rods.
This completes the assembly of your S3.15 Strength-
Training Fitness Equipment. Before exercising on the
S3.15, adjust the cable tension. Refer to Cable
Adjustments and Maintenance .
Note: If you have purchased optional equipment, refer
to the Assembly Instructions accompanying the option.
Step 12. Apply Weight Decals and Lubricant
Weight Label Strip
A
Weight
Label
Guide Rod Spacers*
1 2
B
*Heavy Stack Option not shown.
3 4
Lubricant Guide Rod
C
5 6
page 25