Table of Contents
Advertisement
Solana Assembly and Maintenance Guide
2. Assemble Weight Stack
A. Place two Guide Rods in the large holes on Base
Frame. The Guide Rods will be unstable until you
complete this step. Avoid getting lubricant from the
Rods on your clothing or on other parts of the
machine.
B. Place one Weight Cushion on each Guide Rod and
allow it to slide down to the top of the Base Frame.
C. Add the five 15-lb weights, the ten 10-lb weights,
and the five 5-lb weights. Note the tab location for
the weight stickers (you will attach the stickers
later). Hold your finger over the plastic bushing in
each weight to prevent the bushing from popping
out.
CAUTION: The weights are heavy! Handle the
weights carefully so as not to drop them or injure
yourself. Pick up and place one weight at a time on
the Guide Rods. Have someone hold the Guide
Rods in place while you slide the weights on the
stack.
D. Place the Top Cap Weight on the Guide Rods with
the hole facing away from the Chest Press Upright.
Place it on the weight stack.
E. Attach the Guide Rods to the Guide Rod Bracket
using
two 1-inch bolts
Wrench tighten.
F.
Wrench tighten the bolts from step 1F and 1G.
Step 2. Assemble Weight Stack
E
2 - 1" bolts
Guide rod bracket
D
Top Cap Weight
5 - 5-lb Weights
10 - 10-lb Weights
C
5 - 15-lb Weights
Weight
B
Cushion
A
Guide Rod
1
2
Weight
Plastic
bushing
Tabs for Weight Stickers
go here.
Base Frame
3
4
5
6
page 11
Hide quick links:
Advertisement
Table of Contents
