Assemble Press Arm - Precor move beyond S3.15 Assembly And Maintenance Manual

S3.15 Assembly and Maintenance Guide

5. Assemble Press Arm

Important: Obtain adult assistance to attach the Press
Arm Assembly.
A. Attach the Press Arm Assembly, with the label
facing out, to the Top Beam using
one threaded shaft
two 1-inch buttonhead bolts
two zinc flat washers
Wrench tighten.
Step 5. Assemble Press Arm
1 - threaded shaft
A
2 - " buttonhead bolts
2 - zinc washers
Top Beam
1 2 3
Label on Press Arm Assembly
Press Arm
Assembly
4 5 6
page 15