Assemble Main Structure - Precor move beyond S3.15 Assembly And Maintenance Manual

S3.15 Assembly and Maintenance Guide

1. Assemble Main Structure

A. Attach the Main Base to the Rear Crossbar using
two -inch hex head bolts
four flat washers
two locknuts
B. Install the Rear Upright to the Main Base using
two -inch hex head bolts
four flat washers
two locknuts
Note: Position the uprights so the Shroud mounts
face the center of the unit.
C. Attach the Main Upright to the Main Base
using
two 2 -inch hex head bolts
four flat washers
two locknuts
Step 1. Assemble Main Structure
Rear Crossbar
Main Base
2 - 4 " bolts
A
4 - washers
2 - locknuts
Rear Upright
2 - 4 " bolts
B
4 - washers
2 - locknuts
1 2
Shroud
Main Upright
Mounts
Main Base
3 4 5
2 - 2 " bolts
C
4 - washers
2 - locknuts
6
page 8