S3.45 Assembly and Maintenance Guide
21. Attach Row Bar Shelf and
Seat Pads
A. Attach the Row Bar Shelf to the Rear Upright above
the pulley window using
one 3¾-inch bolt
two washers
one locknut
Finger tighten.
B. Insert the Arm Stem into the Seat Frame with the
seven-hole side facing the Rear Upright.
C. Attach the Arm Pad, thick portion up, to the Arm
Stem using
two 1¼-inch bolts
two washers
Finger tighten.
D. Attach the Seat Pad to the Seat Frame using
two 3-inch bolts
two washers
Finger tighten.
E. Wrench tighten.
Step 21. Attach Row Bar Shelf and Seat Pads
Arm Pad
Seat Pad
2 - 3" bolts
D
2 - washers
Seat Frame
1
2
1 - 3¾" bolt
A
2 - washers
1 - locknut
Row Bar
Shelf
2 - 1¼" bolts
C
2 - washers
B
Arm Stem
3
4
5
Rear Upright
6
page 36