S3.45 Assembly and Maintenance Guide
25. Attach Accessories
A. Attach the Lat Bar to the Spring Clip at the end of
the Top Beam.
B. Attach the Row (V) Handle to the Spring Clip at the
upper window of the Rear Upright and place it in
the holder above it.
C. Attach the 18-inch Straight Bar and chain to the
Spring Clip at the lower pulley window of the Rear
Upright and place it in the holder below it.
D. Attach the Ab Crunch Strap to the Spring Clip on
the Press Arm.
E. Attach the Ankle Strap to the Spring Clip on the
Leg Station.
Step 25. Attach Accessories
A
Lat Bar
Row (V)
B
Handle
E
Ankle Strap
1
2
18-inch
C
Straight Bar
3
4
D
Ab Crunch Strap
5
6
page 42