Assemble Seat Pads - Precor Pacific FITNESS Solana Assembly And Maintenance Manual

Solana Assembly and Maintenance Guide

5. Assemble Seat Pads

Note: Lubricate the chrome Seat Extension with the
supplied lubricant. The lubricant helps the two Seat
Brackets slide more easily. To ease installation,
assemble the Seat Brackets and Seat Pads on the
Seat Extension before mounting it on the Chest Press
Upright.
A. Position the Seat Extension so that the letters on it
will appear through the holes in the brackets.
B. Slide the Long Seat Bracket on the Seat Extension
with the flange pointing up.
C. Slide the Short Seat Bracket on the Seat Extension
with the flange pointing down.
D. Align the Backpad Supports so that they extend off
the bottom of the back side of the Backpad. Attach
using
four 2¾-inch bolts
four washers
Wrench tighten.
CAUTION: Assistance is required for the next steps.
E. With the Backpad still on the floor, have someone
hold the Long Seat Bracket flange between the
Backpad Supports close to the mounting holes.
Attach using
two 2-inch bolts
six washers
two locknuts
The sequence will be bolt, washer, Backpad
Support, washer, Flange, washer, locknut. Wrench
tighten, without overtightening.
Step 5. Assemble Seat Pads
J
C
G
D
A
Long Seat
B
Bracket
4 - 2¾" bolts
D
4 - washers
Backpad
Backpad Supports
1 2
B
F
E
H
Short Seat
C
Bracket
Letters on Seat
Extension
Long Seat
Bracket
Flange
Backpad
Support
Backpad
2 - 2" bolts
E
6 - washers
2 - locknuts
3 4
J
A
I
5 6
page 18