Attach Chest Press Seat - Precor move beyond S3.45 Assembly And Maintenance Manual

S3.45 Assembly and Maintenance Guide

14. Attach Chest Press Seat

A. Attach the Chest Press Upright to the Chest Press
Seat using
four ¾-inch bolts
four washers
Finger tighten.
B. Attach the lower hole at top of the Chest Press
Upright to the Rear Upright using
one 3½-inch bolt
one washer
Finger tighten.
C. Attach the middle hole at the top of the Chest
Press Upright to the Rear Upright using
one 3½-inch bolt
one washer
D. Attach the Chest Press Seat to the Chest Press
Rear Base using
one 3-inch bolt
two washers
one locknut
Finger tighten.
E. Wrench tighten all bolts.
F. Attach the Prestretch Tube and Pulley Plate to the
Rear Upright using
two 3½-inch bolts
two washers
Wrench tighten.
Step 14. Attach Chest Press Seat
Prestretch
Tube
Chest Press
Upright
Rear Upright
4 - ¾" bolts
A
4 - washers
1 - 3" bolt
D
2 - washers
Chest Press
1 - locknut
Seat
1 2
Pulley
Plate
Chest Press
Rear Base
View from behind.
3 4 5
2 - 3½" bolts
F
2 - washers
1 - 3½" bolt
C
1 - washer
1 - 3½" bolt
B
1 - washer
6
page 27