Replacing The Front Arm Assemblies - With Flat Belts And Press Fit Cams (After 4/3/2013) - Precor AMT12 Base Service Manual

47 Replace the Upper Arm Cam Covers as per procedure,
Cover Replacement (on page 163).
48 Secure the belt keeper to the frame.
49 At the console enter the access code PAUSE,5,1,7,6,5,7,6,1, to enter into the diagnostics software.
Navigate to the STRIDE COUNT RESET section and reset the flat belt stride count.
50 Replace the main body covers as per procedure,
51 Check the operation of the AMT12.
Replacing the Front Arm Assemblies - With Flat Belts and
Press Fit Cams (After 4/3/2013)
1 Standing at the front of the AMT, push in and then downward on the cover gasket with your thumbs
until the gasket locking tabs are free of the top cover, grasp the gasket and remove. The gasket is split
At the back to facilitate removal.
© 2012 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Upper Arm Cam
Cover Replacement.
Page 91 of 214