Chapter 6 Operation and Troubleshooting
>
6.3 Maintenance Service
6.3
Maintenance Service
This section explains the ETERNUS DX60/DX80 maintenance service.
IMPORTANT
6.3.1
Maintenance Support Period
The maintenance support period for the ETERNUS DX60/DX80 is 5 years from the date of pur-
chase of the ETERNUS DX60/DX80.
6.4
Post Start-of-Operation Changes to the Configuration
This section explains the procedure to change the configuration after starting the system opera-
tion, using the following example. Refer to necessary part of this section.
• Replacing Fibre Channel Cards
• Replacing LAN Cards / iSCSI HBAs
• Replacing SAS Cards
Refer
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
When performing service maintenance, the maintenance engineer connects
a PC used for maintenance to the device.
Also, the maintenance engineer may require information that is necessary
for performing maintenance operations.
If the main ten ace engineer has any require, we ask that they be handled.
Do
CAUTION
•
When you detect abnormality of the ETERNUS DX60/DX80,
Contact your maintenance engineer immediately.
•
When changing the configuration, record the change by using the
memo page in "ETERNUS Disk storage systems Server Connection
Guide" and so on.
"ETERNUS Disk storage systems Server Connection Guide (Fibre Channel)"
"ETERNUS Disk storage systems Server Connection Guide (iSCSI)"
"ETERNUS Disk storage systems Server Connection Guide (SAS)"
174
Copyright 2009 FUJITSU LIMITED