Fujitsu Eternus DX60 User Manual page 127

Chapter 4 Setup
> 4.3 ETERNUS DX60/DX80 Setup
5-2
5-3
5-4
6
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Enter the affinity group name in [Affinity Group Setting] and specify a volume number
corresponding to the Logical Unit Number (LUN) in [Define LUN Mapping], and click
the [Set] button.
Figure 4.20 [Configure Affinity Group] screen
A confirmation screen appears.
Click the [OK] button.
The affinity group is created, and the affinity group list is displayed.
Click the [Next] button.
The [Define LUN Mapping] screen appears.
Configure a LUN mapping.
Set a volume to be recognized by the server.
When the Host Affinity function is used
Assign an affinity group to each server that is to be connected to the port.
(1)
Select the port to be set from the "Port List" field, and click the [Edit] button.
Figure 4.21 [Define LUN Mapping] screen 1 (when the Host Affinity function is used)
127
Copyright 2009 FUJITSU LIMITED