6,
6
Attach the Lat Tower (4) to the Upright (3) with
four MIO x 25mm Button Head Screws (87), and
four MIO Lock Washers (68),
Attach the Name Hate (89) to the Lat Tower (4)
with two M4 x 16mm Screws (62),
Attach two EyeboUts (34) to the Top Frame (10)
with two M8 Washers (59) and two M8 NyUon
Locknuts (65), Do not overtighten
the Locknuts;
the Eyeboits
must be able to rotate freely,
Attach the Top Frame (10) to the Lat Tower (4)
with two MIO x 65mm Button Head Screws (70),
two MIO Washers (75), and the Top Frame Cover
(93), Make sure that the Eyebolts
(34) are ori-
ented as shown in the inset drawing.
If they
are not, turn the Top Frame around and reat-
tach it.
Attach the Leg Lever Bumper (55) to the Front
Leg (6) with an M4 x 19mm Screw (77),
Lubricate an MIO x 68mm BoUt(56) with grease,
Orient the Leg Lever (7) with the sUoton the side
shown, Attach the Leg Lever to the Front Leg (6)
with the BoUtand an MIO NyUonLocknut (76), Do
not overtighten
the Locknut;
the Leg Lever
must be able to pivot easily.
/
68
_3
7O
65
_\
75
Side View
34
34
Lubricate
56.
76
77
87
87
7