Advanced Playback; Zooming; Locating Desired Scene; Repeat Playback - Toshiba 15DLV16 Service Manual

Basic playback
Playing a disc (Continued)
To obtain a higher quality picture
Occasionally, some picture noise may appear on the TV screen while playing a
DVD video disc because the high resolution pictures on these discs include a lot
of information. In such case, you may reduce the SHARPNESS with the Picture
control adjustment menu (see page 28).
About
DVD VCD CD
The icons on the heading bar show the playable discs for the
DVD VCD CD
function described under that heading.
: You can use this function with DVD video discs.
: You can use this function with Video CDs.
VCD
: You can use this function with Audio CDs and CD-R/RW CDs.
CD
DVD
Basic playback
VCD
CD
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback, press
PLAY.
• The sound is muted during still
mode.
To stop playback
Press STOP.
Notes:
•
If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 8 and 50).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up), "Reading" will appear on the display for a few
minutes and then "Incorrect Disc" will continue to be displayed.
•
Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 39.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
•
Do not move the unit during playback. Doing so may damage the disc.
• Use the EJECT button to unload and eject the disc.
• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.
• There may be a slight delay between the button is pressed and the function activates.
32

Advanced playback

Zooming/Locating desired scene
DVD

Zooming

VCD
CD
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1 Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
1
2 Press / / / to view a different part of the
frame.
You may move the frame from
the center position to UP, DOWN,
LEFT or RIGHT direction.
3
In the zoom mode, press ZOOM repeatedly to
return to a 1:1 view ( Off).
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
34
POWER
TV/DVD
EJECT
VOL +/–
ENTER
/ / /
PAUSE
PLAY
STOP
To remove the disc
Press EJECT.
Remove the disc after the disc comes
out.
0–9
ZOOM
JUMP
CANCEL
ENTER
/ / /
RECALL
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to playback. In the case of VCD/CD
discs, time and track are used to locate the desired point to
playback.
To check the title, chapter and time, press RECALL.
1
Press JUMP during playback or resume stop mode.
Jump
Title
Chapter
Time
2 Press or to select the "Time", "Title/Track"
or "Chapter".
Jump
Title
Chapter
Time
3 Press Number buttons (0–9) to input the
number.
Jump
Title
Chapter 12
Time
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4 Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the JUMP does not
work. To turn off PBC, see page 39 .
DVD
Playing in fast reverse or fast forward directions
VCD
CD
Press REV or FWD during playback.
REV: Fast reverse playback
FWD: Fast forward playback
Notes:
Each time you press REV or FWD • The TV/DVD mutes sound during reverse and forward scan
button, the playback speed changes.
• The playback speed may differ depending on the disc.
Playing frame by frame
DVD
VCD
Press PAUSE during still playback.
Each time you press PAUSE, the
picture advances one frame.
Note:
The sound is muted during frame by frame playback.
DVD Playing in slow-motion
VCD
Press SLOW (REVERSE) or (FORWARD)
during playback.
Each time you press the button, the
Notes:
slow-motion speed changes.
• The sound is muted during slow-motion playback.
• The Video CD cannot play Reverse Slow.
DVD
Locating a chapter or track
VCD
CD
Press SKIP or repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Note:
A "Prohibition" symbol "✕" may appear at the upper right of the screen. This symbol means either the feature you tried is not
available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.
Repeat playback/A-B Repeat playback
DVD

Repeat playback

VCD
A-B repeat playback allows you to repeat a section between
1 Press PLAY MODE during playback or stop
two selected points.
mode.
[DVD]
2
Press ENTER to select "Chapter" or "Title".
The unit automatically starts
repeat playback after finishing
the current title or chapter.
Play Mode
Repeat : Off
[Video CD]
Press to select "Repeat".
Press ENTER to select "Track" or "All".
The unit automatically starts
repeat playback after finishing
the current track.
Play Mode
Mode : Off
Repeat : Off
• If you set the repeat mode during stop mode,
Press REPEAT A-B again.
press PLAY to start Repeat playback.
[Audio CD and MP3/WMA CD]
Please "Repeat playback (CD)" .
44 Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
3
Press PLAY MODE again to clear the screen.
• You cannot set the A-B Repeat for the scenes that include
• A-B Repeat playback does not work when Repeat playback is
To resume normal playback
• You may not be able to set A-B Repeat, during certain scenes
Select Repeat : "Off" in step 2.
Notes:
• A-B Repeat does not work with an interactive DVD, MP3/WMA/
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, Repeat functions are
• A-B Repeat is prohibited when PBC is on.
prohibited during playback.
• Chapter/Track repeat function is canceled whenever SKIP
or is pressed.
REV
PLAY
PAUSE
FWD
SKIP
/
SLOW /
To resume normal playback
Press PLAY.
of DVD and Video CD discs. Howerer, the TV/DVD plays
sound during fast forward or fast reverse play of audio CDs.
To resume normal playback
Press PLAY.
To resume normal playback
Press PLAY.
Playback starts from the beginning of
the current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of
the preceding chapter or track.
33
PLAY MODE
ENTER
PLAY
SKIP
/
REPEAT A-B
DVD

A-B Repeat playback

VCD
1
Press REPEAT A-B during playback.
The start point is selected.
A
2 Press REPEAT A-B again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point and
returns to Point A automatically,
then starts again.
A B
To resume normal playback
Off
" " appears on the screen.
not be displayed.
multiple angles.
activated.
of the DVD.
JPEG CD.
35