Advanced Playback; Zooming; Locating Desired Scene; Repeat Playback - Toshiba SD-P4000 Service Manual

14-inch lcd tv/dvd combination
Hide thumbs Also See for SD-P4000:
Table of Contents

Advertisement

Basic playback
Playing a disc (continued)
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About
DVD
VCD
CD
The
icons on the heading bar show the playable discs for the
DVD
VCD
CD
function described under that heading.
: You can use this function with DVD video discs.
: You can use this function with Video CDs.
VCD
: You can use this function with Audio CDs and CD-R/RW CDs.
CD
DVD
Basic playback
VCD
CD
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback, press
PLAY.
• The sound is muted during still
mode.
To stop playback
Press STOP.
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 8 and 45).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press the PLAY button on the unit, "Reading"
will appear on the display for 30 seconds and then "Incorrect Disc" will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 39.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the EJECT button to unload and eject the disc. Do not push the disc while it is moving. Doing so may cause the unit to
malfunction.
• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
POWER button on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
32

Advanced playback

Zooming/Locating desired scene
DVD

Zooming

VCD
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM
1 (x 1.3),
2 (x 1.5) and
(x 2.0).
1
Press
/ / /
to view a different part of the
2
frame.
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
3
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view (
Off).
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
34
POWER
PLAY
STOP
PAUSE
EJECT
To remove the disc
Press EJECT.
Remove the disc after the disc comes
out.
RECALL
0–9
ZOOM
CANCEL
/ / /
ENTER
JUMP
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the disc to locate
the desired point to play back.
To check the title, chapter and time, press RECALL.
1
Press JUMP during playback or stop mode.
Jump
Time
Title
3
Chapter
/Enter/0 9/Cancel/Jump
2
Press
or
to select the "Time", "Title" or
"Chapter".
Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
3
Press Number buttons (0–9) to change the
number.
Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the JUMP does not
work. To turn off PBC, see page
.
39
DVD
Playing in fast reverse or fast forward directions
VCD
CD
Press REV or FWD during playback.
REV: Fast reverse playback
FWD: Fast forward playback
Each time you press REV or FWD
button, the playback speed changes.
Playing frame by frame
DVD
VCD
Press PAUSE during still playback.
Each time you press PAUSE, the
picture advances one frame.
DVD
Playing in slow-motion
VCD
Press SLOW
(REVERSE) or
during playback.
Each time you press the button, the
slow-motion speed changes.
DVD
Locating a chapter or track
VCD
CD
Press SKIP
or
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Notes:
• A "Prohibition" symbol
available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
Repeat playback/A-B Repeat playback
DVD

Repeat playback

VCD
CD
1
Press PLAY MODE during playback or stop
mode.
2
[DVD]
Press
/
or ENTER once or twice to select
"Chapter" or "Title".
[Audio CD, Video CD]
Press
to select "Repeat".
Press
/
or ENTER once or twice to select
"Track" or "All".
12
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
3
Press PLAY MODE again to make the screen
disappear.
To resume normal playback
Select Repeat : "Off" in step 2.
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohib-
ited during playback.
To resume normal playback
Press PLAY.
Notes:
• The TV/DVD mutes sound and subtitles during reverse
and forward scan of DVD video discs. However, the TV/
DVD plays sound during fast forward or fast reverse play
of audio CDs.
• The playback speed may differ depending on the disc.
To resume normal playback
Press PLAY.
Note:
The sound is muted during frame by frame playback.
To resume normal playback
(FORWARD)
Press PLAY.
Notes:
• The sound is muted during slow-motion playback.
• The Video CD cannot play Reverse Slow.
repeatedly to display the chapter or track number you want.
may appear at the upper left of the screen. This symbol means either the feature you tried is not
DVD

A-B Repeat playback

VCD
CD
A-B repeat playback allows you to repeat material between
two selected points.
1
Press REPEAT A-B during playback.
The unit automatically starts
repeat playback after finishing
the current title or chapter.
2
Press REPEAT A-B again.
Repeat
Off
/Enter/Play Mode
The unit automatically starts
repeat playback after finish-
ing the current track.
Play Mode
Off
Repeat
Off
/Enter/Play Mode
To resume normal playback
Press REPEAT A-B again.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You cannot set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD, MP3/WMA/
JPEG CD.
• A-B Repeat is prohibited when PBC is on.
REV
PLAY
FWD
SKIP
/
PAUSE
SLOW
/
Playback starts from the beginning of
the current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of
the preceding chapter or track.
33
/ /
ENTER
PLAY
PLAY MODE
REPEAT A-B
The start point is selected.
A
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, re-
turns to Point A automatically, then
starts again.
A B
"
Off
" appears on the screen.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents