Toshiba 24V4210U User Manual page 305

8 Using theTV'sfeatures
Tuning channels
Tuning t othenextprogrammed channel
Tuning analog channels:
Press the Channel Number (0-9) buttons on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the OK
button.
Tuning digital channels:
Press the Channel Number (0-9) buttons on the remote control,
followed by the Dash/100 button, and then the sub-channel number.
For example, to select digital channel 125-1,
press 1, 2, 5, -, 1, and then press the OK button.
NOTE
If a digitalchannel i s notprogrammed, eitherthroughtheautomatic
channel s canor theChannel a ddfunction,see"AutoTuning"on
page 52,youwill haveto tunetheRFchannel u singtheChannel
Numbers andtheDash/100 buttononthe remote control.
Switchingbetween two channels u sing Channel R eturn
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1 Select the first channel you want to view.
2 Select a second channel using the Channel Number buttons
(and the Dash/lO0 button if selecting a digital channel).
3 Press the CH RTN button on the remote control. The previous
channel will display. Each time you press the CH RTN button,
the TV will switch back and forth between the last two
channels that were tuned.
NOTE
Ifyou press theCHRTNbutton froma non-antenna i nput,theTVwill
returnto thelast-viewed input.
Switchingbetween two channels u sing SurfLock
T M
The SurfLock
TM
feature temporarily "memorizes" one channel to
the CH RTN button, so you can return to that channel quickly from
any other channel by pressing the CH RTN button.
To memorize a channel to the CH RTN button:
1 Tune the TV to the channel you wish to program into the
CH RTN button.