Toshiba 24V4210U User Manual page 110

Connecting Your TV
31
Omnecting an HDMI® or DVI device to the HDMI® input
NOTE Theunauthorized recording, u se,distribution, o r revisionof
televisionprograms, videotapes, DVDs, a nd othermaterials is
prohibited undertheCopyrightLawsoftheUnitedStates and other
countries, a ndmaysubjectyouto civil andcriminalliability.
Connecting anHDIVII ®or DVIdevice totheHDIVII ®input
The HDMF _ input on your TV receives digital audio and
uncompressed digital video from an HDMI _9 source device, or
uncompressed digital video from a DVI (Digital Visual Interface)
source device.
This input is designed to accept HDCP (High- Bandwidth
Digital-Content Protection) program material in digital form from
EIA/CEA-861-D- compliant consumer electronic devices (such as
a set-top box or DVD player with HDMI _9or DVI output).
The HDMI <'_ input can accept and display VGA, SVGA, XGA,
WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), and 108019 (24HzI60Hz) signal formats. For detailed signal
specifications, see "HDMI® signal formats" on page 158.
Supported Audio format: Linear PCM, sampling rate 32/44.1/48
kHz.
NOTE Toconnecta computer t o theHDMr_input,see"Connection to the
TV'sHDMI®terminal"on page 39.
To connect an HDMF _device, you will need one HDMI _ cable
(type A connector) per HDMI _9 device.
o:o For proper operation, it is recommended that you use an
HDMI <'_ c able with the HDMI _9 Logo (H_mr).
o:o To display an 1080i/60Hz signal format, you will need a High
Speed HDMI _'_ c able. A conventional HDMFTDVI cable may
not work properly.