Viewingthesystemstatus; Resetfactorydefaults - Toshiba 24V4210U User Manual

8
Setting up your"IV
Vi_ing the system status
To set the Daylight Saving Time status, press the (4/_ arrow)
buttons to select Yes or No, highlight Done, and then press the OK
button.
Viewingthesystemstatus
1 Press the MENU button to open the Setup menu.
2 Highlight Installation, and then press the OK button.
A new set of Installation menu icons appear.
3 Open the System Status menu, highlight System
Information, and then press the OK button.
4 Press the (@1_ arrow) buttons to scroll through the menu bar
to select Factory Defaults or Support Information.
The related information appears.
To close the screen and return to the Installation menu highlight
Done in the Support Information screen or highlight No in the
Factory Defaults screen, and then press the OK button.
To return to normal viewing, press the CANCEL button.
ResetFactoryDefaults
1 Press the MENU button to open the Setup menu.
2 Highlight Installation, and then press the OK button.
A new set of Installation menu icons appear.
3 Open the System Status menu, highlight System
Information, and then press the OK button.
4 Press the (41_ arrow) buttons to scroll through the menu bar
to select Factory Defaults.
5 Highlight Yes, and then press the OK button.
6 If a PIN code have been set, enter your PIN code.
7 Press the (41_ arrow) buttons to select Done, and then press
the OK button.
A warning message appears.
8 Select Yes, and then press the OK button.
the TV turns oft"automatically after a few seconds. After the
TV turns oft', unplug the TV power cord and then plug it in
again to complete the reset process.
9 To cancel the reset process, select No, and press the OK
button.