Selecting The Cinema Mode; Using The Freezefeature - Toshiba 24V4210U User Manual

Using theTV'sfeatures 75
Selecting the cinema mode
Aspect Ratio qf Automatic Aspect Size (automatically selected when Auto
Signal Soume Aspect is On)
Notdefined(no ID-1 Thecurrentpicturesizeyouset under, s ee"Selecting the
dataor HDMI ® aspect
data) picturesize"on page69,
NOTE Theautoaspectratiofeature is notapplicable to thePCinput.
To turn on the auto aspect ratio feature:
1 Press the MENU button and open the Picture menu.
2 Highlight Theater Settings, and then press the OK button.
3 To save the new settings, highlight Done, and then press the
OK button. To revert to the factory defaults, highlight Reset
and then press the OK button.
To turn off the Auto Aspect ratio feature, Select Off in step 3 above.
Selecting t hecinema mode
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to tile VIDEO, ColorStream ®HD (component
video), or HDMI ® inputs on tile TM smoother motion can be
obtained by setting tile Cinema Mode to Film.
To set tile Cinema Mode to Film:
(available for 480i and 1080i signals)
1 Press tile MENU button and open tile Picture menu.
2 Highlight Picture Settings, and then press tile OK button.
3 Highlight Advanced Picture Settings, and then press tile OK
button.
4 In tile Cinema Mode field, select Film.
5 To set Cinema Mode to Video, Select Video in Step 4 above.
Usingthe FREEZE feature
To use tile FREEZE feature:
1 When watching tile TV, press tile FREEZE button to freeze
tile picture.
2 To unfreeze tile picture, press tile FREEZE button again
(or any other button).