Toshiba CV32F68 Service Manual page 22

Basic Manual Recording
(Continued,
Skipping unnecessary scenes or editing a tape
To stop recording momentarily, press PAUSE/STILL
To resume recording, press PAUSE/STILL again.
Note
During a timer recording, the pause mode cannot be
selected.
Error messages
When you press REC and no
cassette is loaded, "NO
CASSETTE" is displayed.
NO CASSETTE
When you insert a cassette
without the safety tab, "CHECK
CASSETTE" is displayed.
CHECK CASSETTE
When you press REC while the
VCR is in any other mode,
"STOP AND RECORD" is
displayed.
STOP AND RECORD
When you press any tape
operation buttons (except
STOP and PAUSE/STILL), while
recording, "RECORDING" is
displayed.
RECORDING
Tape Speed
Recording
A tape can be recorded at two different speeds:
SP (Standard Play recorded at 33.4 mm/sec.) and SLP
(Super Long Play recorded at 11.1 mm/sec.).
The SLP speed is more economical than SP because the
available recording time is three times longer.
However, tapes recorded at SP speed have better
playback quality than ones recorded at SLP speed.
Recording time
SP
SLP
Playback
There are three possible speeds for playback:
SP, LP (Long Play recorded at 22.2 mm/sec.), and SLP.
The appropriate speed is automatically selected by the
VCR.
1 -21