Unlocking Programs Temporarily; Using The Input Lock Feature - Toshiba DLP 56HM66 Operating Manual

HM66 ENbook Page 38 Thursday February 23. 2006 2:49 PM
Unlocking programstemporarily
If you try to tune the TV to a prograln that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
You can either temporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1
2
Press
MUTEc),
Enter your four-digit PIN code and press @. If the correct
code is entered, the program lock mode is released and the
normal picture appears. All locking is disabled until the
TV is turned off, and will be enabled when the TV is
turned on again.
Usingthe input lock feature
You can use the Input Lock feature to lock the video inputs
(VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream
HD-2, HDMI 1, and HDMI 2) and channels 3 and 4. You will
not be able to view the input sources or channels until you
unlock the inputs.
To lock/unlock the video inputs:
1
2
3
4
5
Press M_u and highlight the Locks menu icon.
Press • to display the PIN code entering screen.
Enter your four-digit PIN code and press @.
Press • to highlight
Input
Lock and press I_.
Press • or• to select the level of video input locking you
prefer, as described below.
Video: Locks VIDEO 1, VIDEO 2, ColorStream HDI/
HD2, HDMI I/HDMI 2.
Video+: Locks VIDEO 1, VIDEO 2, ColorStream HDI/
HD2, HDMI I/HDMI 2, and channels 3 and 4.
• Select Video+ if you play video tapes via an ANT input.
• When a CableCARD
TM
is inserted, Video+ will not
lock channels 3 and 4.
Off: Unlocks all video inputs and channels 3 and 4.
6
Press @.
38
HM66 (E/F) Web 213:276