Toshiba 62MX196 User Manual

Toshiba 62MX196 User Manual

Integrated high definition dlp projection television
Hide thumbs Also See for 62MX196:
Table of Contents

Advertisement

MX196_EN.book Page 1 Tuesday, June 27, 2006 1:43 PM
Integrated High Definition
®
DLP
Projection Television
62MX196
72MX196
IMPORTANT NOTE
Before connecting, operating, or adjusting this product, carefully
read the Important Safety, Installation, Care, and Service
information in the separate Installation Guide.
For an overview of steps for setting up your new TV, see page 7.
Note: To display a High Definition picture, the TV must be receiving a
High Definition signal (such as an over-the-air High Definition TV
broadcast, a High Definition digital cable program, or a High Definition
digital satellite program). For details, please contact your TV antenna
installer, cable provider, or satellite provider.
Note: If the TV is powered off and then quickly on again when the
lamp unit is hot, it may take several minutes for the picture to appear
®
on-screen. This is a property of DLP
a sign of malfunction. For details, see "IMPORTANT NOTICE ABOUT
HOT LAMP RESTART" on page 3.
© 2006 TOSHIBA CORPORATION
All Rights Reserved
TV lamp technology and is NOT
HIGH-DEFINITION TELEVISION
Owner's Record
The model number and serial number are on the back of
your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
VX1A00010200
YC/N
MX196 (E/F) Web 213:276

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba 62MX196

  • Page 1 Owner’s Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model number: Serial number: VX1A00010200...
  • Page 2: Fcc Declaration Of Conformity Compliance Statement (Part 15)

    • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications to this equipment not expressly approved by Toshiba could void the user’s authority to operate this equipment. Important notes about your ®...
  • Page 3: Trademark Information

    MX196_EN.book Page 3 Tuesday, June 27, 2006 1:43 PM “Voice announce” feature When certain non-standard conditions occur, the LEDs on the TV will blink and the TV will play a recorded “voice announcement” describing the condition (see the LED indication table on page 83 for the specific conditions that include a voice announcement).
  • Page 4: Table Of Contents

    Chapter 1: Introduction ......6 Welcome to Toshiba ....... . 6 Features of your new TV .
  • Page 5 MX196_EN.book Page 5 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC ™ home network feature ..60 A. Connecting the TV to your home network ... 60 B.
  • Page 6: Chapter 1: Introduction

    “Specifications” section of this manual. Use with other stands may result in instability, causing possible injury or death. Welcome to Toshiba Thank you for purchasing this Toshiba TV, one of the most ® innovative DLP projection TVs on the market.
  • Page 7: Overview Of Steps For Installing, Setting Up, And Using Your New Tv

    Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY. Do not plug in any power cords until AFTER you have connected all cables and devices to your TV.
  • Page 8: Tv Front And Side Panel Controls And Connections

    MX196_EN.book Page 8 Tuesday, June 27, 2006 1:43 PM TV front and side panel controls and connections TV front LAMP POWER TIMER Remote sensor (behind the screen) — Point the remote control toward this area of the TV screen (- “Remote control effective range”...
  • Page 9: Tv Back Panel Connections

    (with analog stereo audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with ColorStream Note: • Component video cables carry only video information; separate audio cables are required for a complete connection.
  • Page 10 **THINC (Toshiba Home Interactive Network Connection) The RJ-45 (Ethernet) port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access MP3 audio files and JPEG picture files that are stored as shared files on a networked PC and play/display ™...
  • Page 11: Chapter 2: Using The Remote Control

    MX196_EN.book Page 11 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control Installing the remote control batteries To install the remote control batteries: Slide the battery cover off the back of the remote control. Install two “AA” size alkaline batteries. Match the + and –...
  • Page 12: Learning About The Remote Control

    MX196_EN.book Page 12 Tuesday, June 27, 2006 1:43 PM Learning about the remote control The buttons used for operating the TV only are described here. For a complete list of the remote control’s functions, see the remote control functional key chart (- pages 14–15). For a list of the buttons that operate the TV Guide On Screen system, see the separate TV Guide On Screen Program Guide.
  • Page 13 MX196_EN.book Page 13 Tuesday, June 27, 2006 1:43 PM 17 EXIT closes on-screen menus and the TV Guide On Screen ™ system. 18 INFO provides detailed information on highlighted items ™ in the TV Guide On Screen system ( On Screen ™...
  • Page 14: Remote Control Functional Key Chart

    MX196_EN.book Page 14 Tuesday, June 27, 2006 1:43 PM Remote Control functional key chart REMOTE Toshiba TV CABLE CONTROL KEY (TV) MODE Remote control device mode selection SELECT LIGHT Lights the remote key. s TV SLEEP Sleep timer POWER Power...
  • Page 15 MX196_EN.book Page 15 Tuesday, June 27, 2006 1:43 PM REMOTE Toshiba TV CABLE CONTROL KEY (TV) CH RTN/ Previous Previous DVD RTN channel channel On-screen s TV RECALL display Sound MUTE Sound mute mute Slow FWD* SLOW Slow REW* SKIP z...
  • Page 16: Using The Remote Control To Operate Your Other Devices

    Note: The TV remote control is preprogrammed to operate most Toshiba devices. To operate a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you will need to program the remote control. See “Programming the remote control to operate your other...
  • Page 17: Searching And Sampling The Code Of A Device (8500)

    MX196_EN.book Page 17 Tuesday, June 27, 2006 1:43 PM To control the TV, press the TV MODE SELECT button. Note: • Although the TV remote control includes codes for many devices, it may not include codes for some or all of the features on certain devices you want to control.
  • Page 18: Multi-Brand Remote Control Device Codes

    MX196_EN.book Page 18 Tuesday, June 27, 2006 1:43 PM Multi-brand remote control device codes Brand Code Toshiba 1524 Cable boxes Brand Code 0003, 0008 Americast 0899 Bell South 0899 Clearmaster 0883 ClearMax 0883 Coolmax 0883 Digeo 1187 Director 0476 GoldStar...
  • Page 19 Sylvania 0675, 0821 Symphonic 0675 Teac 0790, 0809 Technics 0490, 0703 Technosonic 0730 Techwood 0692 Theta Digita 0571 Toshiba 0503, 0695, 1154, 1854 Tredex 0800, 0803, 0804 Urban Concepts 0503 US Logic 0839 Venturer 0790 Vizio 1064, 1226 Xbox 0522...
  • Page 20: Cable/Pvr Combos

    0041 Teac 0000, 0041 Technics 0035, 0162 Teknika 0000, 0035, 0037 Thomas 0000 Tivo 0618, 0636, 0739, 1996 0240 Toshiba 0043, 0045, 0209, 0210, 0212, 0366, 0845, 1008, 1145, 1972, 1996 Totevision 0037, 0240 Touch 1972 Unitech 0240 Vector 0045...
  • Page 21: Audio Amps

    0490, 0604, 0605, 0673, 1364 Sugden 0157 TAG McLaren 0157 Tascam 0420 Teac 0180, 0378, 0393, 0420 Technics 0029, 0303 Toshiba 0019, 0299 Victor 0072 Wards 0053, 0157 Yamaha 0036, 0170, 0187, 0490, 1292 Audio Amps/Tuners Brand Code 0531 Aiwa...
  • Page 22: Chapter 3: Menu Layout And Navigation

    MX196_EN.book Page 22 Tuesday, June 27, 2006 1:43 PM Chapter 3: Menu layout and navigation Main menu layout The tables below and on the next page provide a quick overview of your TV’s menu system. To open the main menus (illustrated below), press Y on the remote control or TV control panel. Icon Item Picture Viewer...
  • Page 23: Setup/Installation Menu Layout

    MX196_EN.book Page 23 Tuesday, June 27, 2006 1:43 PM Setup/Installation menu layout The Installation menu contains the Terrestrial, Network, TV Guide On Screen (as described below). To open the Installation menu (illustrated below), press Y on the remote control or TV control panel, open the Setup menu, select Installation, and press T.
  • Page 24: Thinc

    Navigate Exit ENTER Select EXIT * Toshiba Home Interactive Network Connection. Navigating the menu system You can use the buttons on the remote control or TV control panel to access and navigate your TV’s on-screen menu system. Press Y to open the menu system.
  • Page 25: Chapter 4: Setting Up Your Tv

    MX196_EN.book Page 25 Tuesday, June 27, 2006 1:43 PM Chapter 4: Setting up your TV Selecting the menu language You can choose from three different languages (English, French, and Spanish) for the on-screen display of menus and messages. ™ Note: The TV Guide On Screen menus are in English, regardless of the language selected in this menu.
  • Page 26: Programming Channels Into The Tv's Channel Memory

    MX196_EN.book Page 26 Tuesday, June 27, 2006 1:43 PM Programming channels into the TV’s channel memory When you press < or , on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV’s channel memory.
  • Page 27: Manually Adding And Deleting Channels In The Channel Memory

    MX196_EN.book Page 27 Tuesday, June 27, 2006 1:43 PM Manually adding and deleting channels in the channel memory After automatically programming channels into the channel memory, you can manually add or delete individual channels. To add or delete channels in the channel memory: Press Y and open the Setup menu.
  • Page 28: Setting The Time And Date

    MX196_EN.book Page 28 Tuesday, June 27, 2006 1:43 PM Setting the time and date Note: If you already set up the TV Guide On Screen the time and date were set automatically and you can skip this step. To set the time and date: Press Y and open the Setup menu.
  • Page 29: Setting The Hdmi ™ Audio Mode

    MX196_EN.book Page 29 Tuesday, June 27, 2006 1:43 PM Setting the HDMI ™ audio mode To set the HDMI audio mode: Press Y and open the Setup menu. Highlight HDMI 1 Audio (or HDMI 2 Audio) and press c. Press b or B to select the HDMI audio mode (Auto, Digital, or Analog) and press T.
  • Page 30: Setting The Quick Restart ™ Feature

    MX196_EN.book Page 30 Tuesday, June 27, 2006 1:43 PM Setting the Quick Restart ™ With the Quick Restart feature set to On, the TV will stay in Standby mode for several minutes after the TV is turned off (see Note below). If the TV is turned on from Standby mode, the full picture appears immediately.
  • Page 31: Viewing The System Status

    System Information System Information Sun Jan 1, 2006 12:12:19am Product Information Brand: Toshiba Model: 62MX196 Mar 1 2006 - 11:05:49 Done To close the screen and return to the Installation menu: Highlight Done and press T. To return to normal viewing: Press O.
  • Page 32: Chapter 5: Using The Tv's Features

    MX196_EN.book Page 32 Tuesday, June 27, 2006 1:43 PM Chapter 5: Using the TV’s features Selecting the video input source to view The video inputs available to view will be determined by the input terminals you used to connect your devices (see the Installation Guide).
  • Page 33: Tuning Channels

    MX196_EN.book Page 33 Tuesday, June 27, 2006 1:43 PM To save the new input labels, highlight Done and press T. To revert to the factory default labels, highlight Reset and press T. Input labeling example: The screen below left shows the default Input Selection screen (with none of the inputs labeled as a specific device).
  • Page 34 MX196_EN.book Page 34 Tuesday, June 27, 2006 1:43 PM ™ To set up the Channel Browser Press Y and open the Preferences menu. Highlight Channel Browser Setup and press T. Press B to highlight Navigation, and then press C or c to select either Browse Mode or Select Mode.
  • Page 35: Tuning To The Next Programmed Channel

    MX196_EN.book Page 35 Tuesday, June 27, 2006 1:43 PM To tune to a channel or input in Select mode: While watching TV, press 3 C or # c to open the Channel Browser ™ and surf back to a previous item or forward to the next item in the list.
  • Page 36: Switching Between Two Channels Using Channel Return

    MX196_EN.book Page 36 Tuesday, June 27, 2006 1:43 PM Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. Select the first channel you want to view. Select a second channel using the Channel Number buttons (and the dash (=) button if selecting a digital channel).
  • Page 37: Selecting The Picture Size

    MX196_EN.book Page 37 Tuesday, June 27, 2006 1:43 PM Selecting the picture size You can view many program formats in a variety of picture sizes—Natural, TheaterWide 1, TheaterWide 2, TheaterWide 3, and Full. Note: The “picture size” illustrations are examples only. The format of the image (in any of the picture sizes) will vary depending on the format of the signal you are currently watching.
  • Page 38: Scrolling The Theaterwide ® Picture (Theaterwide 2 And 3 Only)

    MX196_EN.book Page 38 Tuesday, June 27, 2006 1:43 PM TheaterWide 3 picture size (for letter box programs with subtitles) The picture is stretched wider to fill the width of the screen, • but only slightly stretched taller. The top and bottom edges are hidden. To view the hidden •...
  • Page 39: Using The Auto Aspect Ratio Feature

    MX196_EN.book Page 39 Tuesday, June 27, 2006 1:43 PM Using the auto aspect ratio feature When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: A 480i signal from the VIDEO 1, VIDEO 2, ColorStream •...
  • Page 40: Using The Pop Features

    MX196_EN.book Page 40 Tuesday, June 27, 2006 1:43 PM Using the POP features Using the POP double-window feature The POP (picture-out-picture) double-window feature splits the screen into two windows so you can watch two programs at the same time. To display a program in the POP window: Press P to open the POP double-window.
  • Page 41: Selecting The Pop Window Audio Out

    MX196_EN.book Page 41 Tuesday, June 27, 2006 1:43 PM Selecting the POP window audio out While the POP double-window is open, press C or c to select which audio (left or right POP window) to be output from the TV speakers (and also from the VARIABLE AUDIO OUT and A/V AUDIO OUT terminals).
  • Page 42: Adjusting The Picture

    MX196_EN.book Page 42 Tuesday, June 27, 2006 1:43 PM Adjusting the picture Selecting the picture mode You can select your desired picture settings from four different modes, as described below. Mode Picture Quality Sports Bright and dynamic picture (factory setting) Standard Standard picture settings (factory setting) Lower contrast for darkened room (factory...
  • Page 43: Using The Closed Caption Mode

    MX196_EN.book Page 43 Tuesday, June 27, 2006 1:43 PM Using the closed caption mode The closed caption mode has two options: Captions—An on-screen display of the dialogue, narration, • and sound effects of TV programs and videos that are closed captioned (usually marked “CC”...
  • Page 44: Digital Closed Captions

    MX196_EN.book Page 44 Tuesday, June 27, 2006 1:43 PM Digital closed captions You can use the Digital CC/Audio Selector to select digital closed caption services (if available), which will temporarily override regular closed captions on digital channels (only). When such services are not available, the Digital CC/Audio Selector presents a default list of services.
  • Page 45: Selecting Stereo/Sap Broadcasts

    MX196_EN.book Page 45 Tuesday, June 27, 2006 1:43 PM Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations).
  • Page 46: Using The Stablesound ® Feature

    MX196_EN.book Page 46 Tuesday, June 27, 2006 1:43 PM Using the StableSound ® feature The StableSound ® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).
  • Page 47: Using The Locks Menu

    MX196_EN.book Page 47 Tuesday, June 27, 2006 1:43 PM Using the Locks menu The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Channels Block, Input Lock, Front (control) Panel Lock, and New PIN Code features. You can use these features after entering the correct PIN code.
  • Page 48: Blocking Tv Programs And Movies By Rating (V-Chip)

    Done • The additional rating system is not designed, transmitted, or controlled by the TV or Toshiba, nor is the availability of an additional rating system determined or controlled by Toshiba. Similarly, the rating of programs in an additional rating system is not determined, transmitted, or controlled by the TV or Toshiba.
  • Page 49: Blocking Channels

    MX196_EN.book Page 49 Tuesday, June 27, 2006 1:43 PM Independent rating system for broadcasters Ratings Description and Content themes Mature Audience Only (This program is specifically designed to be viewed by adults and therefore may TV-MA be unsuitable for children under 17.) L) Crude or indecent language S) Explicit sexual activity V) Graphic violence Parents Strongly Cautioned (This program contains...
  • Page 50: Unlocking Programs Temporarily

    MX196_EN.book Page 50 Tuesday, June 27, 2006 1:43 PM To unblock all blocked channels at once: Highlight Allow All in step 6 on the previous page, and then highlight Done and press T. Channels Block ANT 1 ANT 2 Allow All Block All Cancel Unlocking programs temporarily...
  • Page 51: Using The Gametimer

    MX196_EN.book Page 51 Tuesday, June 27, 2006 1:43 PM ™ Using the GameTimer You can use the GameTimer to set a time limit for playing a video game (30–120 minutes). When the GameTimer is activated, the TV enters Input Lock mode and locks out the input source for the video game device.
  • Page 52: Setting The Sleep Timer

    MX196_EN.book Page 52 Tuesday, June 27, 2006 1:43 PM Setting the sleep timer You can set the sleep timer to turn off the TV after a set length of time (maximum of 180 minutes). To set the sleep timer using the remote control: Press [ on the remote control to set the length of time until the TV turns off.
  • Page 53: Using The Pc Settings Feature

    MX196_EN.book Page 53 Tuesday, June 27, 2006 1:43 PM Using the PC settings feature You can view the image from a PC on the TV screen. The PC must be connected to the TV’s PC IN terminals (- Installation Guide). The PC Settings feature allows you to make any necessary adjustments to the image.
  • Page 54: Displaying Tv Status Information Using Recall

    MX196_EN.book Page 54 Tuesday, June 27, 2006 1:43 PM Displaying TV status information using RECALL To display TV status information: Press E on the remote control. The following information will display (if applicable): Current input (ANT 1, ANT 2, VIDEO 1, etc.) •...
  • Page 55: Chapter 6: Using The Tv's Advanced Features

    MX196_EN.book Page 55 Tuesday, June 27, 2006 1:43 PM Chapter 6: Using the TV’s advanced features Using the advanced picture settings features Using dynamic contrast When dynamic contrast is set to Low, Middle or High, the TV will detect changes in the picture quality that affect the appearance of your contrast settings and then automatically adjust the video.
  • Page 56: Using Mpeg Noise Reduction

    MX196_EN.book Page 56 Tuesday, June 27, 2006 1:43 PM Using MPEG noise reduction The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled (“grayed out”).
  • Page 57: Selecting The Lamp Mode

    MX196_EN.book Page 57 Tuesday, June 27, 2006 1:43 PM Selecting the lamp mode You can select either the High Bright or Low Power lamp mode. The High Bright mode is useful when additional picture brightness is desired (such as in a bright room). To select the lamp mode: Press Y and open the Video menu.
  • Page 58: Using The Color Management Feature

    MX196_EN.book Page 58 Tuesday, June 27, 2006 1:43 PM Using the Color Management feature The Color management feature allows you to adjust the hue, saturation, and brightness of six colors: red, green, blue, yellow, magenta, and cyan. To adjust the Color Management settings: Press Y and open the Video menu.
  • Page 59: Using The Advanced Audio Settings Features

    MX196_EN.book Page 59 Tuesday, June 27, 2006 1:43 PM Using the advanced audio settings features ™ Using the SRS WOW surround sound feature SRS WOW ™ is a special combination of SRS Labs audio technologies (SRS 3D, SRS Focus, and SRS TruBass) that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources.
  • Page 60: Chapter 7: Using The Thinc ™ Home Network Feature

    If you think your Toshiba TV and router might have compatibility problems, please contact the following: In the U.S., call TACP Consumer Solutions at •...
  • Page 61: Manually Setting Up The Network Address

    MX196_EN.book Page 61 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC Highlight Basic Network Setup and press T. Network Basic Network Setup E-mail Scheduling Setup Home File Server Setup Software Upgrade Navigate ENTER Select CH RTN Back EXIT The message “Obtain network address automatically?”...
  • Page 62: Resetting The Network Address

    MX196_EN.book Page 62 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC The Basic Network Setup menu appears. Press B or b to highlight the IP Address field, and then use the Number buttons on the remote control to input the IP address.
  • Page 63: Mx196 (E/F) Web 213:276

    MX196_EN.book Page 63 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC If the “Sharing” tab on your PC does not have a “Permissions” button, follow step 2.1 below. If the “Sharing” tab on your PC has a “Permissions” button, follow step 2.2 below.
  • Page 64: Microsoft ® Windows ® 2000

    MX196_EN.book Page 64 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC Setting up file sharing on a PC with ® ® Microsoft Windows 2000 On your PC: a) Right-click the folder to be shared. b) Click “Sharing...” (which will open the Properties window for the...
  • Page 65: Setting Up File Sharing On The Tv

    If you experience any difficulties that can only be resolved by a software update, your Toshiba customer service representative will provide you with the appropriate upgrade files and assist you in the proper use of this feature.
  • Page 66: Viewing/Playing Shared Files On The Tv

    • If you are viewing/playing files stored on a networked PC, IT IS RECOMMENDED THAT YOU BACK UP YOUR DATA. Toshiba is not liable for any damage caused by the use of any networked PCs or shared files with this TV. Toshiba will not compensate for any lost data or recording(s) caused by the use of such PCs or data.
  • Page 67: Using The Picture Viewer

    • You must obtain any required permission from copyright owners to download or use copyrighted 10 levels content. Toshiba cannot and does not grant such permission. Accessing JPEG files stored on a networked PC Make sure you have correctly set up your home network and file sharing (- pages 60–65 in this Guide;...
  • Page 68 MX196_EN.book Page 68 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC Viewing JPEG files on the TV After accessing your JPEG files from your networked PC (- page 67), the images automatically display on-screen, with one as a large picture and six in thumbnail format. Picture Viewer //ALLENMPC/Pics/Directory3/Subdirectory1/shelby concept.jpg.
  • Page 69: Using The Audio Player

    • You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba cannot and does not grant such permission. Playing MP3 files stored on a networked PC Make sure you have correctly set up your home network and file sharing (- pages 60–65 in this Guide;...
  • Page 70: Setting Up E-Mail Scheduling

    • Toshiba is not responsible for, nor has any control over, any content recorded and/or viewed using the e-mail scheduling feature. Further, the e-mail scheduling feature is not meant to be used for unauthorized recording and/or viewing of copyrighted works.
  • Page 71 , call TCL Customer Service at 1-800-268-3404 For home network troubleshooting tips, see Chapter 8. Done Done IMPORTANT NOTE system. E-mail scheduling will not ™ system is ™ ™ system. http://www.tacp.com/ or visit http://www.toshiba.ca. or visit MX196 (E/F) Web 213:276...
  • Page 72: Setting Up Smtp Authentication

    MX196_EN.book Page 72 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC Setting up SMTP authentication If your e-mail provider does not allow unknown e-mail clients to send e-mail through them (requires authentication), or uses port numbers different from the default, you will need to fill out the fields in the advanced section of the e-mail scheduler setup.
  • Page 73 MX196_EN.book Page 73 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC “TESTING E-MAIL” ERROR CODES Code Description –1 The TV was able to connect to the e-mail server(s) but could not log on. The TV could not resolve the e-mail server name(s)/address(es).
  • Page 74: Description Of Fields In The "E-Mail Scheduling Setup" Window

    MX196_EN.book Page 74 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC Description of fields in the “E-mail Scheduling Setup” window For instructions on entering data in these fields, see step 5 under “Setting up e-mail scheduling” (- page 70). E-mail Scheduling Setup Please enter your E-mail Setup Information.
  • Page 75 MX196_EN.book Page 75 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC Security settings (Results of various setting combinations when the “E-mail Scheduling” field is set to ON in the “E-mail Scheduling Setup” window) “E-mail “E-mail Level of security Scheduling”...
  • Page 76: Using E-Mail Scheduling

    • Toshiba is not responsible for, nor has any control over, any content recorded and/or viewed using the e-mail scheduling feature. Further, the e-mail scheduling feature is not meant to be used for unauthorized recording and/or viewing of copyrighted works.
  • Page 77: Sample Request E-Mails

    MX196_EN.book Page 77 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC Formatting a request e-mail Recognized tags When you send an ADD, DELETE, GET, or HELP request e-mail to the TV, the TV will recognize only the tags listed below.
  • Page 78: Receiving An E-Mail From The Tv

    MX196_EN.book Page 78 Tuesday, June 27, 2006 1:43 PM Chapter 7: Using the THINC DELETE request e-mail The DELETE request allows you to cancel a scheduled recording or reminder. The required tags for a DELETE request e-mail are (in this order): ID [your ID*] •...
  • Page 79: Chapter 8: Troubleshooting

    MX196_EN.book Page 79 Tuesday, June 27, 2006 1:43 PM Chapter 8: Troubleshooting General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Black box on screen The Closed Caption feature is set to one of the Text •...
  • Page 80 MX196_EN.book Page 80 Tuesday, June 27, 2006 1:43 PM Picture brightness changes soon after turning on TV If you set the lamp mode to Low Power, each time you • turn on the TV, the lamp will start out in High Bright mode but will switch to Low Power mode after a short period of time.
  • Page 81: Home Network Troubleshooting

    MX196_EN.book Page 81 Tuesday, June 27, 2006 1:43 PM Recording problems • If you use the TV’s remote control to start recording, you will not be able to change inputs (- page 32) or open the POP window (- page 40). If you attempt to do so, the message “Not Available While Recording”...
  • Page 82 MX196_EN.book Page 82 Tuesday, June 27, 2006 1:43 PM Automatic setup fails The Ethernet cables are not connected properly or at all. • Connect all cables(- Installation Guide). The DHCP service is not enabled on the router, or no • router is present.
  • Page 83: Led Indications

    If, after trying the solution, the problem still exists: In the U.S., call TACP Consumer Solutions at 1-800-631-3811. • In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click • “Home Entertainment,” and then click “Support.”...
  • Page 84: Chapter 9: Appendix

    For more information, please contact us at the telephone numbers or websites listed above, as applicable. Using any lamp other than those recommended by Toshiba may cause damage to the TV and/or lamp. SUCH DAMAGE IS NOT COVERED UNDER YOUR TOSHIBA WARRANTY. In the U.S.
  • Page 85: How To Replace The Lamp Unit

    MX196_EN.book Page 85 Tuesday, June 27, 2006 1:43 PM How to replace the lamp unit WARNING: RISK OF ELECTRIC SHOCK! TO REDUCE THE RISK OF ELECTRIC SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS SPECIFIED HEREIN. REFER ALL SERVICING NOT SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE PERSONNEL.
  • Page 86: Disposing Of The Used Lamp Unit

    In the U.S., call TACP Consumer Solutions at • 1-800-631-3811. • In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click “Home Entertainment,” and then click “Support.” Disposing of the used lamp unit Place the used lamp unit in the empty box from the new unit.
  • Page 87: Specifications

    PC AUDIO IN: 150 mV(rms), 22 k ohm or greater RJ-45 port: Standard Ethernet (RJ-45) Dimensions 62MX196: Width: 57-1/16 inches (1,450 mm) Height: 39-1/4 inches (997 mm) Depth: 18-3/4 inches (476 mm) ™ 72MX196: Width: 65-13/16 inches (1,672 mm) ™...
  • Page 88: Limited United States Warranty

    Limited United States Warranty ® for DLP Television Models Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DLP TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
  • Page 89: Limited Canada Warranty

    Limited Canada Warranty ® for DLP Television Models Toshiba of Canada Limited (“TCL”) makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DLP TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
  • Page 90 MX196_EN.book Page 90 Tuesday, June 27, 2006 1:43 PM A copy of the GPL source code in this product may be obtained by contacting Toshiba Consumer Solutions at (800)631-3811. There will be a charge to cover the costs of providing the source code.
  • Page 91: Index

    MX196_EN.book Page 91 Tuesday, June 27, 2006 1:43 PM Index ... 70 Account ... 25 Antenna input configuration ... 69 Audio player Audio quality adjustments ... 45 Auto aspect ... 39 Auto power off ... 54 ... 9 Back of the TV Blocking channels ...
  • Page 92 MX196_EN.book Page 92 Tuesday, June 27, 2006 1:43 PM Notes MX196 (E/F) Web 213:276...
  • Page 93 MX196_EN.book Page 93 Tuesday, June 27, 2006 1:43 PM Notes MX196 (E/F) Web 213:276...
  • Page 94 MX196_EN.book Page 94 Tuesday, June 27, 2006 1:43 PM Notes MX196 (E/F) Web 213:276...
  • Page 95 MX196_EN.book Page 95 Tuesday, June 27, 2006 1:43 PM Notes MX196 (E/F) Web 213:276...
  • Page 96 VANCOUVER: 13551 COMMERCE PARKWAY, SUITE 110, RICHMOND, B.C., V6V 2L1, CANADA – TEL: (604) 303-2500 MANUFACTURED BY CableClear, Cinema Series, ColorStream, StableSound, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C. Channel Browser, GameTimer, SurfLock, THINC, and Quick Restart are trademarks of Toshiba America Consumer Products, L.L.C.

This manual is also suitable for:

72mx196

Table of Contents