Page 1
The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model: Serial No.: 1/24/05, 8:55 PM...
Dear Customer, Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions...
• DO NOT attempt to service this product except as specified on pages 56–60. The only user-serviceable item in this product is the lamp unit. 62HM14(E)02-05 Installation, Care, and Service Installation Follow these recommendations and precautions and heed all warnings when installing your TV: 17) Never modify this equipment.
Page 4
Care For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: 29) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen.
Page 5
TV malfunction. The DLP logo and DLP medallion are trademarks of Texas Instruments. 62HM14(E)02-05 projection TV 5) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture quality may be affected by your viewing position and length of viewing time.
Important Safety Information ... 2-5 Introduction ... 7 Welcome to Toshiba ... 7 Exploring your new TV ... 7 Connecting your TV ... 8 Connecting an antenna or cable TV ... 8 Connecting a VCR ... 9 Connecting a cable converter box ... 9 Connecting a cable converter box and VCR ...
Congratulations! You have purchased one of the finest DLP projection TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. This manual applies to model 62HM14. The model and serial numbers are on the back of your TV.
● Component video cables come in sets of three, and are for use with video equipment that has component video output. (ColorStream Toshiba’s brand of component video.) ● HDMI is for use with video equipment that has HDMI output (type A connector) (see page 15).
ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels. You will need: • three coaxial cables 62HM14(E)08-16 Stereo VCR AUDIO From Cable Cable converter box...
IN from ANT OUT to TV CH 3 CH 4 VIDEO Stereo VCR 62HM14(E)08-16 Note: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of a standard video cable.
Antenna S-VIDEO VIDEO IN from ANT From S-VIDEO VIDEO Satellite Dish 62HM14(E)08-16 AUDIO DVD Player AUDIO Satellite Receiver AUDIO Note: For the highest possible picture quality from a DVD player or satellite receiver without component video or HDMI, use an S-video cable.
TV programs. ® Your TV has ColorStream (component video) inputs. Connecting your TV to a DVD player with component video (such as a Toshiba DVD player with ColorStream and realism. – To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch.
CH 4 From DTV Antenna Satelite IN S-VIDEO DTV Receiver with component video 62HM14(E)08-16 Note: For the highest possible picture quality, use component video cables (or an HDMI cable) between the TV and DTV receiver/set-top box. You can connect component video cables to either set of ColorStream inputs on the TV (HD1 or HD2).
This connection allows you to watch video materials recorded on a camcorder. You will need: • one set of standard A/V cables VIDEO 62HM14(E)08-16 Note: If you have VCRs with S-video, use S-video cables instead of standard video cables for better picture performance. Do not connect...
VIDEO AUDIO HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. 62HM14(E)08-16 HDMI = High-Definition Multimedia Interface. DVI = Digital Video Interface. HDCP = High-bandwidth Digital Content Protection. EIA/CEA-861/861B compliance covers the transmission of...
0 (zero). For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even the volume of the amplifier is at its highest level. Amplifier LINE IN 62HM14(E)08-16 1/24/05, 1:42 PM...
(home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is preprogrammed to operate most Toshiba devices. See page 20. If you have a non-Toshiba device or a Toshiba device...
DVD player, or HTIB (home theater in a box) Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below.
VCR, DVD player, or HTIB (home theater in a box) If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so).
SWAP allows direct access to POP channels (page 33) POP DIRECT CH allows access to the programmed channel search function (page 35) CH SCAN illuminates the keypad for five seconds LIGHT 62HM14(E)17-21 POWER RECALL TV / VIDEO INFO CHRTN MENU...
: SELECT ON T I MER SLEEP T I MER FAVOR I TE CH CH LABEL I NG V I DEO LABEL BACKGROUND QU I CK RESTART 62HM14(E)22-25 Control touchpad on TV front TV/VIDEO ANTENNA SPORTS 1 0 0 SAVE SETT...
0- 7 TO SELECT Pressing TV/VIDEO on the remote control displays the current signal source (press TV/VIDEO again or 0–7 to change) 62HM14(E)22-25 E N G L I S H F R A N Ç A I S E S P A Ñ...
7. When channel programming is complete, the message “Completed” appears. 8. Press Channel y or z to view the programmed channels. 62HM14(E)22-25 Note: To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control.
CH LABEL I NG V I DEO LABEL BACKGROUND QU I CK RESTART S E L E C T ENTER : SET 62HM14(E)22-25 A D D E R A S E O F F 1/24/05, 1:45 PM Control touchpad on TV front TV/VIDEO...
CH LABEL I NG V I DEO LABEL BACKGROUND SHADED QU I CK RESTART MOVE ENTER : START (continued on next page) 62HM14(E)26-37 CHANNEL MEMOR I ZED ANT 1 CABLE 0 h 0 0 m POWER TV / VIDEO RECALL INFO...
Page 27
– – – TV CABLE C L E A R A L L CUSTOM MENU ENTER : START MOVE 62HM14(E)26-37 – – – – – – – – – – – – FAVOR I TE CH – – – I NPUT...
5. Press z or y to highlight CLEAR. 6. Press ENTER to erase the channel label. 7. Repeat steps 4–6 to erase other channel labels. 62HM14(E)26-37 – – – – – – – CH LABEL I NG I NPUT L A B E L A –...
Natural picture size example: The way the image displays will vary depending on the format of the program you are currently watching. Conventional picture on a conventional TV screen (continued on next page) 62HM14(E)26-37 TV / VIDEO CBL/SAT TV/VCR Note:...
Page 30
• None of the picture is hidden. 62HM14(E)26-37 Note: • To select the picture size, press PIC SIZE on the remote control or select PICTURE SIZE in the PICTURE menu.
• To raise the picture, press y . SCROL L AD JUSTMENT TO ADJUST • To lower the picture, press z. SCROL L AD JUSTMENT TO ADJUST 62HM14(E)26-37 SPORTS V I DEO H I BR I GHT –10 POWER TV / VIDEO RECALL...
P I CTURE SCROLL SELECT ENTER : SET 3. Press y or z to select ON, and then press ENTER. 62HM14(E)26-37 Note: The AUTO ASPECT feature is available for additional formats when viewing HDMI sources because AUTO ASPECT operates based on information found in the digital Automatic aspect size HDMI signal (not ID–1signal).
(0–6). To close the POP window: Press SPLIT again or EXIT. 62HM14(E)26-37 Note: • The SPLIT buttons on the remote control • You can display only 480i format program • You cannot display the ANT-2 signal source •...
(main or POP) from the speakers. The POP sound in the TV mode is monaural only. The selected audio source indicator is displayed in purple. Example: Press x MAIN purple 62HM14(E)26-37 Example: Press • MAIN purple 1/24/05, 1:48 PM Note: •...
(Press CH SCAN again to return to a normal picture.) 2. Press the Channel Number buttons to select one of the twelve pictures. 62HM14(E)26-37 480i 480p/720p/1080i 1/24/05, 1:48 PM Note: •...
Moving picture About the auto favorite feature If your TV is in the program lock mode (page 40), after 4 seconds the TV starts the auto favorite channel search function. 62HM14(E)26-37 Moving picture purple POWER TV / VIDEO RECALL...
TV detects the signals and blocks the programs according to your selections. To use this feature, perform the following setup. (continued on next page) 62HM14(E)26-37 Note: The V-Chip function is available for the U.S. V-Chip system only. The Canadian V-Chip system is not supported.
Y7FV.) All Children (This program is designed to be appropriate for all children.) 62HM14(E)38-42 V - CH I P CH LOCK V I DEO LOCK NEW P I N CODE V –...
E N T E R : SET V-CHIP MENU : Highlight V-CHIP menu, then press ENTER to return to the V-CHIP menu. 62HM14(E)38-42 MPAA RAT I NG NC17 PG13 PG MPAA RAT I NG V – CH I P MENU...
C L E A R A L L LOCKS MENU 0–9 SELECT ENTER : SET 4. Repeat steps 2 and 3 for other channels. 62HM14(E)38-42 After 4 seconds TV / VIDEO CBL/SAT POP DIRECT CH MUTE TV/VCR PAUSE FREEZE CH SCAN...
Page 41
– – – CABLE C L E A R A L L LOCKS MENU MOVE ENTER : START 62HM14(E)38-42 CH LOCK – – – I NPUT – – – – – – – – – – – – – – –...
V I DEO LOCK V I DEO NEW P I N CODE 0–9 SELECT ENTER : SET 3. Press ENTER. The new PIN code is now active. 62HM14(E)38-42 2 5 6 2 POWER TV / VIDEO RECALL INFO CHRTN MENU DVDMENU...
The PICTURE qualities you adjusted can be saved in the TV’s memory (see page 44). You can keep these settings or choose factory set options, as described under “Selecting the picture mode” above. 62HM14(E)43-48 P I CTURE SPORTS MODE P I CTURE SETT I NGS...
MOVE ENTER : SELECT 4. Press x or • to select the mode you prefer. Mode Picture Quality cool bluish medium neutral warm reddish 62HM14(E)43-48 COOL COOL POWER TV / VIDEO RECALL INFO CHRTN MENU MENU DVDMENU yzx • ENTER...
ENTER. The PICTURE SETTINGS menu appears. 3. Press y or z to highlight RESET. 4. Press ENTER until the RESET changes to “DONE.” 62HM14(E)43-48 ANTENNA SPORTS COOL Note: • When in ColorStream or HDMI mode, • DNR is not selectable in the HDMI mode.
3. Press y or z to select FILM. To set the CINEMA MODE to VIDEO (off ): Press y or z to select VIDEO in step 3 above. 62HM14(E)43-48 P I CTURE MODE BR I GHT P I CTURE SETT I NGS...
6. Finish labeling the other video sources as desired. To return to the previous menu, press y or z to highlight CUSTOM MENU, and then press ENTER. 7. To exit the menu, press EXIT. 62HM14(E)43-48 Note: • When ColorStream HD 1 or HD 2 is selected, the VIDEO OUT jack does not output a signal.
MOSCOW PARIS ROME TOKYO To turn off the Closed Caption feature: Highlight OFF in step 4. 62HM14(E)43-48 O F F Note: A closed caption signal may not display in the following situations: • when a videotape has been dubbed • when the signal reception is weak •...
CH LABEL I NG V I DEO LABEL BACKGROUND QU I CK RESTART 0–9 SELECT ENTER : SET 62HM14(E)49-55 1 0 h 3 0 m 0 h 00m 2h50m → 3h00m → 0h00m 2 h 0 0 m POWER RECALL TV / VIDEO...
SELECT ENTER : SET To display the time on-screen: Press RECALL. 62HM14(E)49-55 Note : If the TV’s power source is interrupted (the power cord is unplugged or a power failure occurs), the clock must be reset. 0 9 : 2 5...
3. Press y or z to highlight SAP, and then press ENTER. You will hear the station’s second audio program (if available) from the speakers, while viewing the original program’s picture (see note at right). 62HM14(E)49-55 Control touchpad on TV front S T E R E O Note :...
WOW, SRS, and the symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc. 62HM14(E)49-55 Note: If the broadcast is monaural, the WOW SRS 3D surround sound effect will not work.
A U D I O STABLE SOUND SPEAKERS AUD I O OUT SELECT ENTER : SET To turn off the StableSound feature: Select OFF in step 3 above. 62HM14(E)49-55 ® feature O F F POWER TV / VIDEO RECALL INFO CHRTN...
• MAIN: Outputs the sound of the main (left window) program through the AUDIO OUT terminals. • POP: Outputs the sound of the POP (right window) program through the AUDIO OUT terminals. 62HM14(E)49-55 Note: Make sure the volume control of your audio amplifier is set to a moderate listening level.
If the power is going to be off for a long time and you are going to be away from your TV, unplug the power cord to prevent the TV from turning on in your absence. 62HM14(E)49-55 SHADED SOL I D...
TV and/or lamp. CAUTION: Always replace with same type lamp unit: Model No. TB25-LMP (Stock no. 23311083) (Continued on next page) 62HM14(E)56-59 WARNING: RISK OF ELECTRIC SHOCK! TO REDUCE THE RISK OF ELECTRIC SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS SPECIFIED HEREIN.
WARNING may result in death or serious injury. 4. Using a manual Phillips screwdriver, loosen the two screws on the lamp unit. (Continued on next page) 62HM14(E)56-60 Eye damage may result from Thumb screw Lamp unit door detail...
Page 58
Make sure the lamp unit and screws are installed securely; otherwise, the TV may not turn on and the lamp life may be shortened. 62HM14(E)56-59 8. Reattach the lamp unit door, making sure to insert the hooks on the left side of the lamp unit door inside the opening in the TV cabinet.
Turn the POWER OFF and then ON again. If the problem persists, replace the lamp unit (see pages 57–59). If the problem still persists, contact a Toshiba Authorized Service Center. Turn the POWER OFF and unplug the power cord. If the problem persists, contact a Toshiba Authorized Service Center.
WARNING: RISK OF ELECTRIC SHOCK ! Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center. Television System NTSC standard...
Cannot access signal input sources (Video1, Video2, Video3, ColorStream HD1/HD2, HDMI) and/or Channels 3 and 4. 62HM14(E)60-62 Solution • Make sure the power cord is plugged in, then press POWER. • The remote control batteries may be dead. Replace the batteries.
Limited United States Warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DLP TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
Locking channels ...40 Locking video inputs ... 42 Locks menu ... 37 Menu system ... 22 MTS feature ...51 MUTE button ...51 62HM14(E)63 ON timer ...49 Picture adjustments COLOR TEMPERATURE ...44 Picture mode ... 43 Picture quality ... 43 Picture-out-picture (POP) CH SCAN button ...
Page 64
HEAD OFFICE: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISION:1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. ColorStream, StableSound, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C. CableClear and SurfLock are trademarks of Toshiba America Consumer Products, L.L.C.