Unlocking Programs Temporarily; Locking Channds - Toshiba COLORSTREAM 43A10 Owner's Manual

Unlocking programs temporarily
1. If you try to watch a TV program that exceeds the rating limits
you set, the TV will enter into the program lock mode.
THIS PROGRAM HAS BEEN BLOCKED!
TV-PG L V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
CABLE
4
2. If you want to watch the locked program temporarily, press
MUTE.
3. Press the Number buttons (0-9) to enter the 4-digit code
rou stored.
BLOCK I NG ACTIVE
ENTER Pl N CODE
TO TEMPORARILY UN-BLOCK
O-9:TO SELECT ENTER:TO SET
4. Press ENTER.
It7the number is correct, the lock mode will be released and the
normal picture will appear.
All locking is disabled until the TV is turned off_ and will be
enabled when the TV is turned on again.
If a wrong PIN code is entered, the "Incorrect" message appears.
Locking channels
With the CH LOCK feature, you can lock specific channels. The TV
will not be able to tune these channels with the Channel A Y buttons
or Channel Number buttons, unless you clear the setting.
You can lock a maximum of eight channels.
To lock channels:
1. From the LOCKS menu, select CH LOCK.
2. Press 4 or _" to display the CH LOCK menu.
3. Press the Channel Number buttons to enter the channel you
want to lock. (The channel you are currently watching cannot be
locked.)
4. Press ENTER.
;d
R_LL MUTE POWER
MUTE
Channel
Number
ENTER
LOCKS Menu
O LOCKS
V-CHIP
ENABLE BLOCKING ON
TV RATING
MPAA RATING
NEW P IN CODE
To select each item:
Press V or A.
LOCKS
V-CHI P
ENABLE BLOCKING OFF
TV RAT I NG _*
.>
o o
NEW PIN CODE 0 OTV CABLE
if,
O LOCKS
V-CHIP
ENABLE BLOCKING OFF
TV RATING
MPAA RATING
NEW P IN CODE
TV CABL_ i
5. Repeat steps 3 and 4 for other channels.
29