Rm-Cpu; Rm-Io; Rmb-Cpu; Rmb-Io - Hitachi GR2000 Series Installation Manual

GR2000 Installation Guide
Table 2-3
Device cabinet
GR2000-10H
GR2000-20H
2.4.2.1

RM-CPU

Each RM-CPU contains one K6-2 [300 MHz] processor and two main memory slots.
Each memory slot accepts a 64 MB memory module (MS64) and a 128 MB memory
module (MS128), thus being able to configure up to 256 MB of memory. In addition,
each RM-CPU of GR2000-4S, GR2000-6H, GR2000-10H, and GR2000-20H includes
one RS-232C AUX port.
2.4.2.2

RM-IO

Each RM-IO has one RS232 console port, two memory card (MC) slots, one
10BASE-T port, and a packet-forwarding ASIC.
2.4.2.3

RMB-CPU

Each RMB-CPU has a common Pentium III (850 MHz) and four main storage (MS)
slots. Since the main storage of 256 bytes (MS256) can be mounted, a memory of 1G
bytes as maximum can be mounted.
Being different from RM-IO, BCU-S850S, BCU-H850H, BCU-M850H, and
BCU-L850H have the RS-232C AUX board in RMB-IO.
2.4.2.4

RMB-IO

RMB-IO has two RS232C console boards, two memory card (MC) mechanism slots,
one board of 10BASE-T/100BASE-TX, and a packet forwarding engine (Packet
Forwarding ASIC).
Duplication of BCU is possible only in GR2000-6H, GR2000-10H and GR2000-20H
by mounting two sets of BCU.
2-30
Abbreviation for BCU model names and configuration of each device
Abbreviation for
BCU model name
BCU-M300H
BCU-M850H
BCU-L300H
BCU-L850H
Configuration
• RM-CPU (MH) board
• RM-IO (H) board (Built in 6x6 cross bar switch)
• RMB-CPU (MH) board
• RMB-IO (H) board (Built in 6x6 cross bar switch)
• RM-CPU (LH) board
• RM-IO (H) board
• RMB-CPU (LH) board
• RMB-IO (H) board
GR2K-GA-1002
Rev 6.03