Hitachi GR2000 Series Installation Manual page 231

maximum number of dynamic entries and static entries. Use the device so that t
total value of dynamic and static entries does not exceed the maximum number o
entries for the device. Using the device at the maximum entry capacity requires
mounted memory amount shown in "(3) Minimum required memory".
Table 4-44 Maximum Number of Dynamic and Static Entries
Item
IP unicast route entries
IP multicast route entries
ARP entries
IPX routing table entries
IPX ARP entries
Bridge filtering database entries
* Total maximum per router is determined by number of installable RPs for the target router model.
** It will be 1000/device in the case of PIM-SM.
Maximum Limit
Total
2,000,000/router 2,000,000/router
10,000/router** 10,000/router**
4,096/RP*
1,000/router 1,000/router
256/router
2,000/router 2,000/router
Dynamic Static
3,000/router
4,096/RP* 4,096/router
200/router
- 256/router
500/router
-