Hitachi GR2000 Series Installation Manual page 242

entry number describable when utilizing the MPLS policy routing function. This
function requires that the total number of IP filter entries used by all the functions
mounted in this device be set so that this value is not exceeded in order to utilize the
IP filter table as in the IP policy routing function.
Table 4-55 Maximum entry number of MPLS policy
Item Maximum RP entry number Maximum device entry number
Maximum number of 2,000/RP 10,000/device
describable policy entry
4.2.11.7 Dynamic Entry and Static Entry Maximum Entry Count
The maximum entry count of dynamic and static entries when using MPLS functions
is shown in Table 4-56. Use a sum total of dynamic and static entries that does not
exceed the maximum device entry count. When using maximum entries, it is
necessary to have the memory capacity indicated in (d) Minimum Required Memory.