Storage Instructions - Stanley 48ZS Owner's Manual

Gasoline engine powered lawnmower
Table of Contents

Advertisement

Storage Instructions
48ZS
Short Term Storage
Let engine cool before storing and do not store
near flame, high heat, and possible ignitions from
sparks.
Always clean off all flammable material as well as
grime and dirt before storage.
Never use a pressure washer and avoid drenching
the control panel, motor, engine, and hydro pumps
with water.
Wash with mild detergent and water only.
After washing the machine engage the engine at
high and let the mower run for 5 minutes.
Shutofffuelforstoringortransporting.
Carefully release pressure from components with
stored energy.
Store mower only on the ground.
Do not drain fuel indoors or near a flame.
Use jack stands to support components when
required.
Always park machine on level ground and setthe
parking brake when storing.
Store the machine in a clean and dry environment.
Always remove the key from the ignition.
Add a petroleum based conditioner in the gas tank
and run for 5 minutes to distribute through mower.
Extended
Storage
Change air filter.
Make sure all fuel is drained before storing.
To ensure all fuel is drained from the mower, run
the mower until it runs out of gas before storage.
Check the spark plugs condition and pour two
tablespoons of engine oil in the spark plug holes
and leave the spark plug wire off.
Cover the machine when in storage.
Remove Battery and clean terminals and cable
connectors.
Store battery in a cool dry place.
Everything mentioned in short term
storage
should also be applied to extended storage.
Rev:
May2011
STANLEY 48" ZS
26

Advertisement

Table of Contents
loading

Table of Contents