Table of Contents
Advertisement
Operating Instructions
48ZS
Operating the Mower
1.
Make sure the brake has been moved to the OFF
Position.
2.
Pull both control handles to the center.
.
To drive the mower forward, push both handle bars
forward away from the chest. The forward speed is
directly proportional to the degree these handles
are moved forward.
4.
To turn the mower left, push to the right handle in
front of the left handle or the left handle more
towards the neutral position than the right handle.
5.
To turn the mower right, perform the handle
movements described in step 4 above with except
with the opposite handle position.
6.
To stop the forward motion of the mower, move
both the handles to the center/neutral
position.
7.
To drive the mower backwards, pull both handle
bars backwards toward the chest.
8.
To turn backwards to the right or left, repeat the
steps in 4 or 5 above except in the opposite
direction.
9.
To zero degree turn to the right, push the left handle
forwards and the right handle backwards.
10. To zero degree turn to the left, push the right handle
forwards and the left handle backwards.
11. When in the neutral position, the hydraulic system
prevents the mower from moving easily. However,
on a grade, the mower can move very slowly (with
the engine off or running). Be sure to set the
manual parking brake anytime the mower is left
unattended or is being transported.
12. When the handles are in the middle position they
can be pushed away from each other to lock the
mower in the neutral.
Rev:
May2011
STANLEY 48" ZS
11
Advertisement
Table of Contents
