Heat & Glo 350TRSI-AUF Owner's Manual page 59

Display Screen
FIREPLACE STATUS
THERMOSTAT
FLAME HEIGHT
FAN SPEED
ADJUSTABLE
AUXILIARY
ADJUSTABLE
OUTPUT (ON/OFF)
TIMER DISPLAY/FUNCTION
Figure 12.11 RC300AU Display Screen
Function Buttons
Use POWER button to turn the unit on and off.
V
Menu
Use MENU button to display the menu functions.
V
Menu
Only functions that can be activated will be
V
Select
displayed. For example: Flame Height will not
V
Select
be displayed when the remote status is OFF.
V
Menu
Use the SELECT button to select the current
V
Select
feature.
V
V
Use the UP and DOWN arrows to toggle
through the menu functions and value selec-
V
V
tions in the submenus.
THERMOSTAT DESIRED
TEMP SETTING
CHILD LOCK
INDICATOR
TRANSMISSION
INDICATOR
LOW BATTERY
INDICATOR
FUNCTION LEVEL
INDICATOR
ROOM TEMP
DISPLAY
Heat & Glo • 350TRSI-AUF, 350TRSILP-AUF • 2089-980 Rev. R • 2 /13
Idle When Remote is in ON Mode
The remote control will go into an idle mode if no but-
tons are pressed within 5 seconds. Press any button to
resume full functionality. In idle mode only active func-
tions will show on the screen.
Standby mode
The remote control will go into a standby mode if no but-
tons are pressed within 5 minutes. Press the POWER
button to reactivate the remote control to ON mode. Ac-
tive functions will be displayed
59