Heat & Glo LifeStyle XLR-N-AU Owner's Manual page 48

FIREPLACE OPENING
15-3/4 in. TO 16 in.
(400 mm TO 410 mm)
Figure 13.4 Required Fireplace Opening Height
Note: The lower cover panel must be pushed all the way
down. The outer finishing flanges should line up. The
fireplace opening must be between 15-3/4 in. and 16
in. (400 mm and 410 mm) for the decorative fronts to fit
correctly. See Figure 13.4, Figure 13.5 and Figure 13.6.
Sealing Joints
All joints between the factory-installed non-combustible
board and 3/8 in. (10 mm) building material (dry wall,
plywood, wood composites, etc.) can be taped and sealed
with combustible drywall tape.
48 Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. o • 1/13
LOWER FINISH FLANGE
BOTTOM COVER PANEL
Figure 13.5 Lower Cover Panel Positioned Incorrectly.
RIGHT SIDE
FINISH
FLANGE
LOWER FINISH FLANGE
BOTTOM COVER PANEL
Figure 13.6 Lower Cover Panel Positioned Correctly
RIGHT SIDE
FINISH
FLANGE