Heat & Glo LifeStyle XLR-N-AU Owner's Manual page 2

MODELS: XLR-N-AU, XLR-PB-AU
ARE SAI GLOBAL APPROVED FOR
NATURAL GAS, PROPANE OR BUTANE
AS A BALANCED FLUE HEATER.
Refer to the appliance data plates for gas
consumptions and pressures.
Installation of this appliance should only be
carried out by an authorized person in ac-
cordance with the manufacturer's instruc-
tions. Appliance is to be installed in full
compliance with the National Gas Installa-
tion Standard AS5601, the manufacturer's
instructions, and any local authorities' re-
quirements for gas, electrical and building
regulations.
This appliance and its components are
tested and safe when installed in accor-
dance with this Installation Manual. Report
to your dealer any parts damaged in ship-
ment, specifically check glass condition.
The gas logs and flue system components
are in separate packages. Read all in-
structions before starting installation and
follow these instructions carefully during
Heat & Glo, a brand of Hearth & Home Technologies
7571 215 Street West, Lakeville, MN 55044
th
Copyright 2011 • Printed in U.S.A.
2
PLEASE READ THIS MANUAL BEFORE INSTALLING
AND USING THIS APPLIANCE.
It is the responsibility of the professionals involved with the service and
installation of the appliance to test the operation of the appliance before
leaving the installation site.
IMPORTANT: Read all instructions carefully before starting installation.
Failure to follow these installation instructions may result in a possible fire
hazard and will void the warranty. Save this manual for future reference.
Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. o • 1/13
installation to ensure maximum benefit and
safety. Failure to follow them will void your
warranty and may present a fire hazard.
The Heat & Glo, a brand of Hearth & Home
Technologies warranty will be voided by,
and Heat & Glo, a brand of Hearth & Home
Technologies disclaims any responsibility
for the following actions:
• Installation of any damaged heater or
flue system component
• Modification of the heater or balanced
flue system installation other than as
instructed by Heat & Glo, a brand of
Hearth & Home Technologies.
• Improper positioning of the gas logs or
the glass door
• Installation and/or use of any component
part not manufactured or approved by
Heat & Glo, brand of Hearth & Home
Technologies, not withstanding any
independent testing laboratory or other
party approval of such component part
or accessory.