Fisher-Price B2108 Instructions Manual page 8

Assembly
Frame Hub
Push
Button
Swing
Tube
Front
of Seat
Curved
17
Front
Base
• Position the seat assembly so that the front of the seat is
toward the curved front base.
• While pressing the buttons on the swing tubes, insert them
into the frame hubs. Push the swing tubes up until the but-
tons "snap" into the hole in the frame hubs.
• Push down on the seat to be sure the seat is secured in both
frame hubs.
Frame
Hubs
18
• Insert a #8 x 1 / " screw into each frame hub and tighten.
3
8
• Again, push down on the seat to be sure the seat is secured
to both frame hubs.
• Fit the pocket on the back of the pad onto the seat back.
• Fit the waist belts through the smaller slots in the pad.
/
3
#8 x 1 " Screw - 2
8
Shown Actual Size
• Lift the bottom of the pad.
• Insert the pad elastic loops through the holes in the
• Insert the crotch belt through the slot in the pad.
• From under the seat, fit the elastic loops onto the tabs on
8
Waist Belts
19
Pad
Elastic
Loops
Holes
20
seat bottom.
the seat bottom.
Pad
Crotch Belt
Crotch
Belt
Seat Bottom