Fisher-Price B2108 Instructions Manual page 7

Assembly
Slots
13
• Lift the seat tubes slightly.
• With the seat wire hanging down, insert the ends of the seat
wire through the slots in the seat, as shown.
Rounded Edge Up
Seat Wire
Cap Hole
Ends of
14
Seat Wire Seat Wire
Cap
• While holding the seat wire in place, carefully turn the
seat around so that the front faces you.
• Position the seat wire cap so that the rounded edge
is upright.
• Fit each end of the seat wire through the hole in each
seat wire cap.
Seat Wire
Seat Wire Cap
Press in Place
Seat Wire is
Through Hole in
Seat Wire Cap
Seat Wire
15
• Press the seat wire caps
into place.
• Insert two #6 x screws
5 / "
8
through each seat wire cap
and tighten.
Hint: The seat wire caps are designed to fit into the seat only one
way. If the screw holes in the seat wire caps do not align with the
holes in the seat, try switching the seat wire caps onto the
opposite ends of the seat wire.
Accessory Bin
16
Seat
• Turn the seat face down.
• Fit an accessory bin into the groove on each side of the
seat, as shown.
• Insert two #8 x 1 / " screws into each accessory bin
3
8
and tighten.
7
Caps
#6 x 5 / " Screw - 4
8
Shown Actual Size
Accessory Bin
Grooves
/
3
#8 x 1 " Screw - 4
8
Shown Actual Size