Table of Contents
Advertisement
Storage
Buttons
• Turn the toy bar back to it's storage position.
• Press the button on the inside of each housing and push the
rear legs toward the front legs. Stand the frame against a
wall for storage.
Press
Toy Bar
Care
The pad is machine washable. Wash the pad separately in
cold water on the gentle cycle. Do not use bleach. Tumble
dry separately on low heat and remove promptly. The frame,
tray, and toybar may be wiped clean using a mild cleaning
solution and a damp cloth.
Upper
Pad
Pocket
Elastic
Loops
To remove the pad:
• Unhook the four elastic hooks from the pegs on the seat
back and bottom.
• Push the restraint belts back through the slots in the pad.
• Slide the upper pad pocket off of the seat back.
• Slide the lower pad pocket off of the seat bottom.
To replace the pad:
• Refer to Assembly steps 19 - 21.
Note: This product has no consumer serviceable parts. Do not
take this product apart.
15
Elastic
Loops
Lower
Pad
Pocket
Restraint
Belts
Advertisement
Table of Contents
