Registering The Transfer Request; Registering A Transfer Station/Receiving Station - Lanier LD225 Settings Manual

Registering the Transfer Request

This section describes how to register
the Transfer Station and Receiving
Station used in the fax function's
Transfer Request.
Note
❒ Before you can use Transfer Re-
quest, you must program the Poll-
ing ID and set the Transfer Report.
S e e " P r o g r a mm i n g a P o l l i n g
ID"and "Transfer Report", Facsim-
ile Reference <Advanced Features>.
❖ Transfer Station
Refers to the machine that receives
the Transfer Request to forward in-
coming messages to another desti-
nation.
❖ Receiving Station
Refers to the facsimile or computer
that receives messages from the
Transfer Station.
Limitation
❒ When messages are transferred by
fax, Transfer Stations must be ma-
chines of the same manufacturer as
this one, and have the Transfer Sta-
tion function.
❒ When messages are transferred by
e-mail, Transfer Stations must be
machines of the same manufactur-
er as this one, and have both the
Transfer Station and Internet Fax
functions.
❒ You cannot use Transfer Request
without programming the fax
number or e-mail address of the
Requesting Party in the Address
Book of the Transfer Stations.
Registering the Transfer Request
Note
❒ Polling IDs of the Requesting Party
(this machine) and Transfer Sta-
tions must be identical.
❒ You can have up to 30 Receiving
Stations per Transfer Station. If
you specify a Transfer Station
Group, the group counts as a sin-
gle receiver.
Registering a Transfer
Station/Receiving Station
A
Press the {User Tools/Counter} key.
B
Press [System Settings].
C
Press [Administrator Tools], and then
press [TNext].
D
Press [Address Book: Program / Change /
Delete Transfer Request].
E
Press [New Program].
5
111