Lanier LD225 Settings Manual page 107

Note
❒ If the format of the entered
path is not correct, a message
appears. Press [Exit], and
then enter the path again.
Using Browse Network to locate
the folder
A Press [Browse Network].
The client computers sharing
the same network as the ma-
chine appear.
Note
❒ If you have already specified
your user name and pass-
word in steps
Browse Network display
only lists client computers
you are authorized to access.
B Select a client computer.
Shared folders under it appear.
Note
❒ You can press [Up One Level]
to switch between levels.
C Select the folder you want to
register.
The Logon display appears.
Note
❒ If you have already entered
an authorized user name and
password, the Logon display
will not appear. Proceed to
step F.
F L
to , the
O
P
Q
R
S
Changing a registered folder
A
B
C
D
D Enter the user name.
Note
❒ This is a user name which is
authorized to access the fold-
er.
E Enter the user's password, and
then press [OK].
The Browse Network display
reappears.
Note
❒ If the entered user name or
password is not correct, a
message appears. Press [Exit],
and then enter the user name
and password again.
F Press [OK].
Press [Connection Test] to check the
path is set correctly.
Press [Exit].
Note
❒ If the connection test fails, check
the settings, and then try again.
Press [OK].
Press [Exit].
Press the {User Tools/Counter} key.
Press the {User Tools/Counter} key.
Press [System Settings].
Press [Administrator Tools], and then
press [TNext].
Press [Address Book Management].
Registering Folders
95
5