Size Magnification - Lanier LD225 Function Manual

Note
❒ You cannot use the bypass tray
with this function.
❒ When using Auto Reduce/En-
large, see the following table for
original sizes and orientations you
can use:
❖ Metric version
Original location
Exposure glass
ADF
❖ Inch version
Original location
Exposure glass
ADF
❒ You cannot use the Rotated Copy
function when enlarging to B4 JIS
or A3. When enlarging to B4 JIS or
A3 size copy paper, place the orig-
inal in the L orientation.
Reference
p.12 "Sizes difficult to detect"
You can place originals of different
sizes in the ADF at the same time. See
p.16 "Mixed size".
Original size and
orientation
A3L, B4 JISL,
A4KL, B5 JISKL,
" × 13"L
1
8 /
2
A3L, B4 JISL,
A4KL, B5 JISKL,
A5KL
Original size and
orientation
11" × 17"L,
" × 14"L,
1
8 /
2
" × 11"KL
1
8 /
2
11" × 17"L,
" × 14"L,
1
8 /
2
" × 11"KL,
1
8 /
2
10" × 14"L,
" × 8
1 1
5 / / "KL
2 2
A
Press [Auto Reduce/Enlarge].
B
Select the paper tray.
C
Place the original, and then press
the {Start} key.

Size Magnification

This function calculates an enlarge-
ment or reduction ratio based on the
lengths of the original and copy.
Note
❒ Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
A
Press [Reduce/Enlarge] .
B
Press [Specifd. Ratio].
Copier Functions
2
AFU152S
37