Pentax K-5 Operating Manual page 76

4
6
7
Use the four-way controller (A v) to select [Bracketing
Amount] and press the four-way controller ( • ).
Use the four-way controller (• •)
to select the bracketing amount
and press the OK button.
Select [+1] (default setting), [+2], [+3] or
[+4].
For [White Balance], select from [BA+I]
(default setting), [BA+2], [BA+3], [GM+I],
[GM+2] or [GM+3].
Press the MENU button twice.
The camera returns to Capture mode.
Take a picture.
Three images are saved.
o
• Exposure Bracketing and Extended Bracketing can be used at the same ==
time. When used at the same time. each time the shutter is released for
Exposure Bracketing. three images with Extended Bracketing applied are
saved
• Parameters that cannot be set due to the image finishing tone setting of
Custom Image also cannot be set for Extended Bracketing. (Example: When
set to [Monochrome], Saturation and Hue cannot be selected for Extended
Bracketing) (p.222)
• When [Fine Sharpness] or [Extra Sharpness] is set for Custom Image, the
sharpness of Extended Bracketing operates as Fine Sharpness or Extra
Sha rpness.
• When [Contrast] is set for Custom Image, the contrast of Extended
Bracketing operates according to the [Contrast] setting.