Pentax K-5 Operating Manual page 134

6
7
Press the
OK
button.
The adjustment value is saved.
Press the MENU button three times.
The camera returns to Capture mode.
Take a test picture.
YOU can easily check the focusing point by enlarging the image during
Digital Preview (p.138) or Live View (p.165).
Even when an adjustment value has been saved using [Apply 0ne], if you
press the OK button with [Apply A!!] selected inStep 3, the [Apply All] value is
used instead of the [Apply One] value.
_"'Seleciing"""ihe"Focusin g A rea (A F Poini"i' ...............................
Choose the part of the viewfinder to set focus to. The factory default
setting is ,uTo _ (Auto).
Selected AF point(s) light red in the viewfinder (Superimpose AF Area).
F:q Center Sets the focusing area to the center of the viewfinder.
Sets the focusing area to the user selected point from eleven
SEL Select points in the AF frame.
The camera selects the optimum AF point even if the subject
is not centered. You can select from 11 AF points (default
Auto
AUTO
setting) or 5 points in [AUTO AF Point Setting] in the [I_ Rec.
Mode I] menu.
I
Turn the AF point switching dial.