NordicTrack A2550 PRO NTL08009.0 User Manual page 9

5. 5
Holda BoltSpacer ( 88)inside thelowerendof
theRightUpright ( 83).Insert a 3/8"x 5 1/2"
PatchBolt(7)witha 3/8"StarWasher ( 11)into
theRightUpright a ndtheBoltSpacer. R epeat
this step
with a second Bolt Spacer (88), 3/8"
× 5 1/2" Patch Bolt (7), and 3/8" Star Washer
(11).
Hold the Right Upright (83) against the Right
Upright Spacer (91). Be careful not to pinch
the Upright Wire (85). Tighten the 3/8" x 5 1/2"
Patch Bolts (7) until the heads of the Patch Bolts
touch the Upright; do not fully tighten the
Patch Bolts yet.
83
88
,
With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (55) so that the treadmill is more stable;
do not fully fold the Frame yet.
See the inset drawing. Orient the Left Upright
Spacer (90) with the two curved corners posi-
tioned as shown. Set the Left Upright Spacer on
the Base (94).
Hold a Bolt Spacer (88) inside the lower end of
the Left Upright (82). Insert a 3/8" x 5 1/2" Patch
Bolt (7) with a 3/8" Star Washer (11) into the
Left Upright and the Bolt Spacer. Repeat this
step with a second Bolt Spacer (88), 3/8" x
5 1/2" Patch Bolt (7), and 3/8" Star Washer
(11).
Hold the Left Upright (82) against the Left
Upright Spacer (90). Tighten the 3/8" x 5 1/2"
Patch Bolt (7) until the heads of the Patch Bolts
touch the Upright; do not fully tighten the
Patch Bolts yet.
88
82
55
90
Curved
Corners
9