Using The Alarm Clock - Philips VRKD12BL Instruction Book

6 Using t heAlarm Clock
Putting Batteries in the Alarm Clock
I
I
Remove the battery compartment lid on the backof the
alarm clock,Use your fingeror fingernail t o flip down the lid.
@
2
Insert one AA battery insidethe battery compartment with
its + and - endsplacedas shownin the pictureat right.
3
Replace the battery compartment lid.
2 3
Using the Alarm Clock Holder
I
Pop _e three slotsof the alarm clock holder into the three
holes on the left side of the front of theVCR.The holder will
curve down, like a bowl, when placed correctly.
2
A velcro strip is supplied.Peel off the tape backing,then stick
one piece of the velcro to the front of theVCR and one piece
to the top of the clock as shown in the picture at right. Make
sure the velcro pieces will touch when the alarm clock is in
place in the holder.
3
Set the alarm clock in the clock holder.
Velcroon
backof clock
Velcroon
frontof V CR
Alarm clock holder
Setting the Time and the Alarm
I
Turn the right knob to set the current time.
2
Turn the left knob to set the time for the alarm.
3
Set the OFF/ON switch to ON. At the proper time, the
alarmwill sound, The alarm will sounduntil you movethe
OFF/ON switch to OFE
• Set theVCR's internalclockfor a timer recording or One-
Touch Recording.Detailsare on pages14-15.
• When you do not use the alarm, set the OFF/ON switch on
the back of the alarm clock to OFF
• The alarm will sound in the next 12-hour period.The alarm
clock does not haveAM or PM settings.
• The alarm sound is a beep. The bells on the top of the clock
are for appearanceonly. The bells will not ring.
OFFION
Switch
Alarm Knob
(on the left
asyou look
at the back
of the clock)
(on the right
as youlook
at the back
of the clock)