Table of Contents
Advertisement
32 Rerecording
(Copying Tapes)
VCR I
PlayingVCR
, J
VCR 2 - RecordingVCR
2.Video
cable fromVIDEO
OUT
Jack of
VCR
I toVIDEO
IN Jack ofVCR
2
I
VCR I will play your tape. Insert a prerecorded tape in
VCR I. If the tape does not havea record tab, playback begins.If
this happens,press the STOP/EJECTbutton onVCR I once.
2
VCR 2 will record your tape. Insert a blank tape inVCR 2.
Make sure the record tab is intact (details are on page five). Make
sure theVCR 2 power is on andVCR 2 is inVCR position. (The
VCR/TV light will appear.If it does not, press the VCR/TV button
once.)
3
Turn on theTV
and set it to channel 3 or 4,whichever
channel the CH3/CH4
switch on VCR 2 is set to.
4
Point the remote
control atVCR 2. Press the CHANNEL
A/v
buttons until Lineln Rear (L I) appears on the screen.
5
Point the remote control atVCR 2. Use the SPEED but-
ton to select SP or SLP.
6
Press the PLAY button onVCR
I and the RECORD but-
ton onVCR 2 at the same time.
7
To stop recording,
press the STOP/EJECT
button on VCR
2 once, then stop the tape onVCR I.
1\
3. RF coaxial
cable from the
OUT
jack of
VCR2 to the TV's
ANTENNA
IN
Jack
Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe an the rights of copyright
owners and violate copyright laws.
If a program has copyright protec-
tion, it may not record clearly.
Audio and video cables are not sup-
plied.
The illustration uses two VCRsjust
like yours. Different VCRs may oper-
ate differently.
When Lineln Rear (LI ) appears on
the screen, the screen will be blue.
Advertisement
Table of Contents
