Philips VRKD12BL Instruction Book page 10

I0 Hookups Witha Stereo T V
/
d I
VIDEO (yellow) and
AUDIO (white) OUT Jacks
• A_dio andVideo cables are not supplied.
n anteni_a or
cable to
ANT(enna)
IN Jack
°\
Video Cable
I
Audio Cable
Audio and Video
IN Jackson TV
I
Connect the antenna or cable to the ANT(enna) !N Jack
on the back of theVCR.
2
Connect a video cable to the yellowVIDEO OUT Jack on
the back of tbeVCR.Then, connect the other end of the
video cable to theVIDEO IN Jack on your TV.
3
Connect an audio cable to the white AUDIO OUT Jack on
the back of the VCR.Then, connect the other end of the
audio cable to the AUDIO IN Jack on your TV.
(If your TV has Right and LeftAUDIO IN Jacks, y ou must use a "Y"
splitter audio cableas illustratedto deliver audio to the TV's right
and left channels.)
4
Turn on your TV, making sure it is in Line Input (or Auxiliary In
orVideo In) mode. Please refer to your TV instruction book for
details.
u_p_l ui_€
• This hookup will not give you stereo
sound. To get stereo sound, use the
connections on page seven and
select the channel to be viewed at
the TV (with the VCR turned off).