Clock Set; Set Date And Time - Philips VR20D/07 User Manual

64
EN

Clock Set

Turn on the TV and select the AV mode.
MENU
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set "ON" or "OFF" at the Clock
Set screen (the default setting is "ON"). Press OK until the
Just Clock setting begins blinking, then press %fi to change
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
recorder's built-in clock may be reduced, which could
adversely effect timer recording.
VCR POWER
+ +
1 2 3
- -
4 5 6
7 8 9
0
PROG. +
PROG. –
+ +
-
-
OK
SUBSIDIARY SETTINGS (cont.)
IMPORTANT
If you performed Auto Set Up (
( pg. 10) or Auto Channel Set (
having set the clock previously, the recorder's built-in
clock is also set automatically.
Perform the following steps only if —
— Auto Clock Set has not been performed correctly by
Auto Set Up, Preset Download or Auto Channel Set.
or
— the recorder's memory backup has expired.
or
— you want to change Just Clock setting (
in the left column).
TURN THE RECORDER ON
1
Press VCR POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS INITIAL SET
SCREEN
3
Move the highlight bar (pointer) to "INITIAL SET" by
pressing %fi, then press OK or
ACCESS CLOCK SET
SCREEN
4
Move the highlight bar (pointer) to "CLOCK SET" by
pressing %fi, then press OK or
appears.
INTIAL SET
CLOCK SET
GUIDE PROG SET
JLIP ID NO. SET
[5∞] =
[MENU] : EXIT

SET DATE AND TIME

5
Press %fi to set the time, then press OK or
display begins blinking. Repeat the same procedure to
set the date and year.
When you set the time, press and hold %fi to
change the time by 30 minutes.
When you set the date, press and hold %fi to
change the date by 15 days.
pg. 8), Preset Download
pg. 56), without ever
"Just Clock"
#
.
#
. The Clock Set screen
CLOCK SET
TIME DATE YEAR
0: 00 01 . 01 99
JUST CLOCK : ON
TV PR. : 1
[5∞] =
[MENU] : EXIT
#
. The "date"