Table of Contents
Advertisement
36 Rerecording
(Tape Duplication)
I.Audio cables from AUDIO
OUT Jacks ofVCR I to AUDIO
IN Jacks ofVCR 2
2.Video cable fromVIDEO
OUT Jack ofVCR
I toVIDEO
IN Jack ofVCR
2
•
Audio andVideo
cables are not supplied.
The instructionson this page show you how to copy tapes.The
illustration uses two VCRs just like yours. DifferentVCRs may
operate differently.
NOTE:Unauthorized recordingof copyrighted television programs, v ideo
tapes,or other materialsmay infringeon the rightsof copyrightowners and
violatecopyrightlaws.
I
Make the connections shown above.
2
VCR I will play your tape. Insert a prerecorded tape in VCR
I. If the tape does not have a record tab, playback begins.If this
happens,press the STOP/EJECTbutton on VCR I once.
3
VCR 2 will record your tape.Insert a blank tape inVCR 2_Make
sure theVCR 2 power ison andVCR 2 is inVCR position (theVCR light
will appearon the displaypanelof VCR 2).
4
Turn theTV on and set it to channel 3 or 4, whichever chan-
nel the CH3/CH4 switch on VCR 2 is set to.
5
Point the remote
control
atVCR
2. Press the Number
buttons
0, 0. AN IN will appear on-screen.
6
Point the remote
control
atVCR
2. Use the (Tape) SPEED
button
to select SP, LP or SLP.
7
Press the PLAY button
on VCR
I and the REC(ord)/OTR
button
on VCR 2 at the same time.
To stop recording, press the STOP/EJECT button onVCR I,then
press the STOP/EJECT button onVCR 2.
Advertisement
Table of Contents
