Disc Operations; Basic Playback Controls - Philips MC-M570 Manual

Disc Operations
IMPORTANT!
- This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabilizer rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
changer mechanism.
- Do not load more than one disc onto
each tray.
Playable discs
This system s able to pby :
All prerecorded audo CDs
All finalized audio CDR and audio CDRW
discs
MP3-CDs (CD-ROMs w}th HP3 tracks)
DIS[TAL A Ura8 mS[TAL AUmla
@
@
Basic playback controls
Load discs (page 3 - P4).
To play all discs on the disc trays
Press kll
OR
In stop mode, press CD to select a disc tray
1o begin, then pi_ss I_11
All the availablediscs will play once,then stop.
;rz_;T6F1,3 _:
Loading discs (page 3. P4)
@ Press OPEN/CLOSE --_ 1 button to open
disc tray I. •
@ Load a disc with the label side facing up, For
double-sided discs, load the side you want to
play facing up.
@ Press OPEN/CLOSE _ 1 buLton again [o
dose the disc tray
"_ER_I_'_5" is d splayed. The selected disc •
tray4otal number of tracks and the playin8 time
will appear on the dispbx
@ Repeat steps I-3 for loading discs onto the
disc trays 2-5,
To play the selected disc only
Press one of the 5 DISC DIRECT PLAY
(DISC 1-5) buttons (orCD 1-5 on
remote).
The selected disc will pby once, then Stop,
NOtOS:
To ensure good system pertormance, wait until
the d_sc trays completely mad the disc(_) bdure
proceeding
Only one _ray can bu opened a_ each time If
you open Ule second tray betom closing the first
tra_ the first tray will automatically cio_e bdure the
second tray opens
To select a desired track
Press I< or IH i_peatedly until the desired
track is displayed.
@ During random play (shuffle mode), pressing
I< will not affect the current playback.
To search for a particular passage
during playback
Press and hold _ or IH_ and release it when
the desired passageis located.
Dunng searching, t he volume will be reduced.
For MP3 disc,the volume will be muted,
To replace discs without interrupting
playback
Press OPEN/CLOSE --_ buttons of the
inactive disc trays (refer to "Loading discs").
For example, if currently disc tray I is pbying,
you can replace the discs on disctray 2_5.
To interrupt playback
Press I_11
To resume normal playback, repeat the
above.
To stop playback
Press I,
If the system remains in stop mode for 30
mtnutes, }t will switch to Eco Power standby
mode,
18
3139 115 22181